Pce-Wsac 50-311 Yellow/Red Pce Instruments Wind Speed Alarm Controller With 24 V Ac Supply Voltage And 4 20 Ma Input Signal Incl. Rs485 Interface
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the Air Quality Station to measure the average value of the last two or five minutes. If the wind speed values are higher than the preset values, a pre-alarm is first activated before the alarm is output. Both alarms are given visually and acoustically on the wind warning device. If the pre-alarm takes effect, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. When the normal alarm needs to be activated, the red LED will flash and the beep will be played continuously by the device.In general, the Air Quality Station is used wherever wind monitoring has to be carried out. This is often the case in factories, mines, wind turbines and similar. If necessary, a relay can also be connected to the Air Quality Station. In addition to the low wind speeds, the wind measuring device is characterized by its high reliability and high accuracy.Features:Wind warning device with adjustable alarms2 alarm typesSupply voltage: 24 V DCInput signal: 4 ... 20 mACommunication: RS4852 alarm relays installedBuilt-in beeper to alertSensor supply via evaluation deviceIncl. ISO Calibration CertificateIncludes:1 x Anemometer PCE-WSAC 50-3111 x User manual1 x Sensor connector1 x ISO Calibration certificateNote: Wind sensor not included. This must be ordered separately.
Price now:
From
$546.80
To
$631.90
Price History:
Details:Pce-Wsac 50-311 Yellow/Red Pce Instruments Wind Speed Alarm Controller With 24 V Ac Supply Voltage And 4 20 Ma Input Signal Incl. Rs485 Interface
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the Air Quality Station to measure the average value of the last two or five minutes. If the wind speed values are higher than the preset values, a pre-alarm is first activated before the alarm is output. Both alarms are given visually and acoustically on the wind warning device. If the pre-alarm takes effect, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. When the normal alarm needs to be activated, the red LED will flash and the beep will be played continuously by the device.In general, the Air Quality Station is used wherever wind monitoring has to be carried out. This is often the case in factories, mines, wind turbines and similar. If necessary, a relay can also be connected to the Air Quality Station. In addition to the low wind speeds, the wind measuring device is characterized by its high reliability and high accuracy.Features:Wind warning device with adjustable alarms2 alarm typesSupply voltage: 24 V DCInput signal: 4 ... 20 mACommunication: RS4852 alarm relays installedBuilt-in beeper to alertSensor supply via evaluation deviceIncl. ISO Calibration CertificateIncludes:1 x Anemometer PCE-WSAC 50-3111 x User manual1 x Sensor connector1 x ISO Calibration certificateNote: Wind sensor not included. This must be ordered separately.
Price now:
From
$546.80
To
$631.90
This site contains affiliate links for which we may be compensated.
Selectum LLC
0.00% (~ $$v)
New
$546.80
$660.00
JB Tools Affiliate Program
0.00% (~ $$v)
New
$601.43
Selectum LLC
0.00% (~ $$v)
New
$631.90
Selectum LLC | $546.80Free Delivery | Store |
New | $601.43Free Delivery | Store |
Selectum LLC | $631.90Free Delivery | Store |
Product Description
The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the Air Quality Station to measure the average value of the last two or five minutes. If the wind speed values are higher than the preset values, a pre-alarm is first activated before the alarm is output. Both alarms are given visually and acoustically on the wind warning device. If the pre-alarm takes effect, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. When the normal alarm needs to be activated, the red LED will flash and the beep will be played continuously by the device.In general, the Air Quality Station is used wherever wind monitoring has to be carried out. This is often the case in factories, mines, wind turbines and similar. If necessary, a relay can also be connected to the Air Quality Station. In addition to the low wind speeds, the wind measuring device is characterized by its high reliability and high accuracy.Features:Wind warning device with adjustable alarms2 alarm typesSupply voltage: 24 V DCInput signal: 4 ... 20 mACommunication: RS4852 alarm relays installedBuilt-in beeper to alertSensor supply via evaluation deviceIncl. ISO Calibration CertificateIncludes:1 x Anemometer PCE-WSAC 50-3111 x User manual1 x Sensor connector1 x ISO Calibration certificateNote: Wind sensor not included. This must be ordered separately.
Product Specifications
General | |
|---|---|
Color | yellow/red |
Size | 24 |
Brand | PCE-WSAC 50-311 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.