PCE Instruments Electrical Insulation Tester with 3.5" TFT Display (PCE-ITE 50)
The PCE-ITE 50 is a robust Electrical Tester with a large 3.5"" TFT color LCD display. The Electrical Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements. With the Electrical Tester, you can ensure that fixed installations are safely and correctly installed. Thanks to the dual display, the intuitive symbols and the high viewing angle, you can comfortably and quickly perform your measurements with the Electrical Tester. With the low-resistance measurement of the Electrical Tester, you can check grounding conductors, potential equalization rails and protective conductors for low impedance.The measuring range for low-resistance measurement with the Electrical Tester is in the range of 0 - 2000 Ω with a resolution of 0.001 - 1 Ω. Probably the most important measurement of the Electrical Tester is the measurement of insulation resistance. Electrical cables are placed under voltage during the insulation measurement in order to detect fault currents, Which generate material migration or heat. In most cases, these current faults are so minimal that they are not detected by protective devices and in the worst case they can lead to a fire. The Electrical Tester can carry out installation measurement with a test voltage of 125V, 250V, 500V or 1000V. The load current is in each case 1 mA. The Electrical Tester is independent of the mains supply. In order to bring all systems and circuits of a power supply system to a common potential (ground reference or potential reference) and to protect against short-circuit currents and overvoltages, the earthing resistor should be as low-impedance as possible. With a measuring range of 0 ... 2000 Ω with a resolution of 0.01 ... 1 Ω, the Electrical Tester offers all the prerequisites for a meaningful measurement of the grounding resistance.Features:3.5"" color TFT LCD displayLoop resistance L-N, L-PE and N-PEAdjustable FI test currentSD card and BluetoothDual displayGood / bad FI testLow Ohm measurementUp to 1000V terminal voltageIncludes:1 x Electrical Tester PCE-ITE 501 x User manualFor more information, please see Data Sheet
Price now:
From
$1,141.30
To
$1,505.82
Price History:
Details:PCE Instruments Electrical Insulation Tester with 3.5" TFT Display (PCE-ITE 50)
The PCE-ITE 50 is a robust Electrical Tester with a large 3.5"" TFT color LCD display. The Electrical Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements. With the Electrical Tester, you can ensure that fixed installations are safely and correctly installed. Thanks to the dual display, the intuitive symbols and the high viewing angle, you can comfortably and quickly perform your measurements with the Electrical Tester. With the low-resistance measurement of the Electrical Tester, you can check grounding conductors, potential equalization rails and protective conductors for low impedance.The measuring range for low-resistance measurement with the Electrical Tester is in the range of 0 - 2000 Ω with a resolution of 0.001 - 1 Ω. Probably the most important measurement of the Electrical Tester is the measurement of insulation resistance. Electrical cables are placed under voltage during the insulation measurement in order to detect fault currents, Which generate material migration or heat. In most cases, these current faults are so minimal that they are not detected by protective devices and in the worst case they can lead to a fire. The Electrical Tester can carry out installation measurement with a test voltage of 125V, 250V, 500V or 1000V. The load current is in each case 1 mA. The Electrical Tester is independent of the mains supply. In order to bring all systems and circuits of a power supply system to a common potential (ground reference or potential reference) and to protect against short-circuit currents and overvoltages, the earthing resistor should be as low-impedance as possible. With a measuring range of 0 ... 2000 Ω with a resolution of 0.01 ... 1 Ω, the Electrical Tester offers all the prerequisites for a meaningful measurement of the grounding resistance.Features:3.5"" color TFT LCD displayLoop resistance L-N, L-PE and N-PEAdjustable FI test currentSD card and BluetoothDual displayGood / bad FI testLow Ohm measurementUp to 1000V terminal voltageIncludes:1 x Electrical Tester PCE-ITE 501 x User manualFor more information, please see Data Sheet
Price now:
From
$1,141.30
To
$1,505.82
This site contains affiliate links for which we may be compensated.
Selectum LLC
0.00% (~ $$v)
New
$1,141.30
$1,402.00
Selectum LLC
0.00% (~ $$v)
New
$1,269.70
JB Tools Affiliate Program
13.48% (+ $178.89)
New
$1,505.82
Selectum LLC | $1,141.30Free Delivery | Store |
Selectum LLC | $1,269.70Free Delivery | Store |
New | $1,505.82Free Delivery | Store |
Product Description
The PCE-ITE 50 is a robust Electrical Tester with a large 3.5"" TFT color LCD display. The Electrical Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements. With the Electrical Tester, you can ensure that fixed installations are safely and correctly installed. Thanks to the dual display, the intuitive symbols and the high viewing angle, you can comfortably and quickly perform your measurements with the Electrical Tester. With the low-resistance measurement of the Electrical Tester, you can check grounding conductors, potential equalization rails and protective conductors for low impedance.The measuring range for low-resistance measurement with the Electrical Tester is in the range of 0 - 2000 Ω with a resolution of 0.001 - 1 Ω. Probably the most important measurement of the Electrical Tester is the measurement of insulation resistance. Electrical cables are placed under voltage during the insulation measurement in order to detect fault currents, Which generate material migration or heat. In most cases, these current faults are so minimal that they are not detected by protective devices and in the worst case they can lead to a fire. The Electrical Tester can carry out installation measurement with a test voltage of 125V, 250V, 500V or 1000V. The load current is in each case 1 mA. The Electrical Tester is independent of the mains supply. In order to bring all systems and circuits of a power supply system to a common potential (ground reference or potential reference) and to protect against short-circuit currents and overvoltages, the earthing resistor should be as low-impedance as possible. With a measuring range of 0 ... 2000 Ω with a resolution of 0.01 ... 1 Ω, the Electrical Tester offers all the prerequisites for a meaningful measurement of the grounding resistance.Features:3.5"" color TFT LCD displayLoop resistance L-N, L-PE and N-PEAdjustable FI test currentSD card and BluetoothDual displayGood / bad FI testLow Ohm measurementUp to 1000V terminal voltageIncludes:1 x Electrical Tester PCE-ITE 501 x User manualFor more information, please see Data Sheet
Product Specifications
General | |
|---|---|
Material | lead |
Size | large |
Brand | PCE-ITE 50 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.