Akg Pzm10 Pressure Zone Microphone
The PZM10 is a low-profile, cost-effective PZM microphone featuring a 3/4" tubular housing for ceiling, wall or tabletop installations. Intelligibility is excellent, with low frequencies below the voice range rolled off to reduce the pickup of HVAC rumble. Applications include security, surveillance and conferencing. XLR connector, phantom powered.The PZM10, part of the Pressure Zone Microphone® line, are designed for security, surveillance, and conference-table use. The special housing design allows the microphones to be mounted into tables, walls or ceilings easily and inconspicuously.Using Pressure Zone Microphone® technology, the PZM10 are highly sensitive and deliver a wide and smooth frequency response. Thus the PZM10 is characterized by excellent clarity and a consistent pickup anywhere around the mic.FeaturesPressure Zone Microphones for security andsurveillance.Clear, intelligible pickup of speech.Inconspicous, resembles a light switch.Powered by 12-48V phantom power.SpecificationsTransducer type: Electret condenser.Frequency response (typical): 80 Hz to 20,000 Hz.Polar pattern: Hemispherical.Impedance: 240 ohms, balanced; minimum load impedance1000 ohms.Open circuit sensitivity: 2.5 mV/Pa (–52 dBV/Pa).Power sensitivity: –52 dBm/Pa.Equivalent noise level (self-noise): 26 dB SPLtypical (0 dB = .0002 dyne/cm2), A-weighted.S/N Ratio: 68 dB at 94 dB SPL.Maximum SPL: 120 dB SPL produces 3% THD.Operating voltage: 12 to 48V phantom power, positivevoltage on pins 2 and 3 with respect to pin 1.Polarity: Positive pressure on the diaphragm producesa positive voltage on pin 2 with respect to pin 3 of output connector.Current drain: 400 microamperes.Output connectors: Male XLR type (3-pin pro audio).Cable: None supplied. Use 2-conductor shielded miccable.Materials: Steel plate and housing.Finish: Off-white. May be painted any color; takecare to first seal the opening between the capsule and boundary plate.Net weight: 2.6 oz. (73.6 g). AKG PZM10 Flush-Mount Boundary Layer Microphone.
Price now:
From
$245.00
To
$263.64
Price History:
Details:Akg Pzm10 Pressure Zone Microphone
The PZM10 is a low-profile, cost-effective PZM microphone featuring a 3/4" tubular housing for ceiling, wall or tabletop installations. Intelligibility is excellent, with low frequencies below the voice range rolled off to reduce the pickup of HVAC rumble. Applications include security, surveillance and conferencing. XLR connector, phantom powered.The PZM10, part of the Pressure Zone Microphone® line, are designed for security, surveillance, and conference-table use. The special housing design allows the microphones to be mounted into tables, walls or ceilings easily and inconspicuously.Using Pressure Zone Microphone® technology, the PZM10 are highly sensitive and deliver a wide and smooth frequency response. Thus the PZM10 is characterized by excellent clarity and a consistent pickup anywhere around the mic.FeaturesPressure Zone Microphones for security andsurveillance.Clear, intelligible pickup of speech.Inconspicous, resembles a light switch.Powered by 12-48V phantom power.SpecificationsTransducer type: Electret condenser.Frequency response (typical): 80 Hz to 20,000 Hz.Polar pattern: Hemispherical.Impedance: 240 ohms, balanced; minimum load impedance1000 ohms.Open circuit sensitivity: 2.5 mV/Pa (–52 dBV/Pa).Power sensitivity: –52 dBm/Pa.Equivalent noise level (self-noise): 26 dB SPLtypical (0 dB = .0002 dyne/cm2), A-weighted.S/N Ratio: 68 dB at 94 dB SPL.Maximum SPL: 120 dB SPL produces 3% THD.Operating voltage: 12 to 48V phantom power, positivevoltage on pins 2 and 3 with respect to pin 1.Polarity: Positive pressure on the diaphragm producesa positive voltage on pin 2 with respect to pin 3 of output connector.Current drain: 400 microamperes.Output connectors: Male XLR type (3-pin pro audio).Cable: None supplied. Use 2-conductor shielded miccable.Materials: Steel plate and housing.Finish: Off-white. May be painted any color; takecare to first seal the opening between the capsule and boundary plate.Net weight: 2.6 oz. (73.6 g). AKG PZM10 Flush-Mount Boundary Layer Microphone.
Price now:
From
$245.00
To
$263.64
This site contains affiliate links for which we may be compensated.
Full Compass Systems
6.99% (+ $16.00)
New
$245.00
Full Compass Systems | $245.00Free Delivery | Store |
Reverb (US) | $255.00Free Delivery | Store |
Reverb (US) | $263.64Free Delivery | Store |
Product Description
The PZM10 is a low-profile, cost-effective PZM microphone featuring a 3/4" tubular housing for ceiling, wall or tabletop installations. Intelligibility is excellent, with low frequencies below the voice range rolled off to reduce the pickup of HVAC rumble. Applications include security, surveillance and conferencing. XLR connector, phantom powered.The PZM10, part of the Pressure Zone Microphone® line, are designed for security, surveillance, and conference-table use. The special housing design allows the microphones to be mounted into tables, walls or ceilings easily and inconspicuously.Using Pressure Zone Microphone® technology, the PZM10 are highly sensitive and deliver a wide and smooth frequency response. Thus the PZM10 is characterized by excellent clarity and a consistent pickup anywhere around the mic.FeaturesPressure Zone Microphones for security andsurveillance.Clear, intelligible pickup of speech.Inconspicous, resembles a light switch.Powered by 12-48V phantom power.SpecificationsTransducer type: Electret condenser.Frequency response (typical): 80 Hz to 20,000 Hz.Polar pattern: Hemispherical.Impedance: 240 ohms, balanced; minimum load impedance1000 ohms.Open circuit sensitivity: 2.5 mV/Pa (–52 dBV/Pa).Power sensitivity: –52 dBm/Pa.Equivalent noise level (self-noise): 26 dB SPLtypical (0 dB = .0002 dyne/cm2), A-weighted.S/N Ratio: 68 dB at 94 dB SPL.Maximum SPL: 120 dB SPL produces 3% THD.Operating voltage: 12 to 48V phantom power, positivevoltage on pins 2 and 3 with respect to pin 1.Polarity: Positive pressure on the diaphragm producesa positive voltage on pin 2 with respect to pin 3 of output connector.Current drain: 400 microamperes.Output connectors: Male XLR type (3-pin pro audio).Cable: None supplied. Use 2-conductor shielded miccable.Materials: Steel plate and housing.Finish: Off-white. May be painted any color; takecare to first seal the opening between the capsule and boundary plate.Net weight: 2.6 oz. (73.6 g). AKG PZM10 Flush-Mount Boundary Layer Microphone.
Product Specifications
General | |
|---|---|
Color | light/white |
Gender | male |
Material | steel |
Size | 2.5 |
Brand | AKG |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.