Se Electronics Se6160 Pair
Take control of audio captured in live environments where the uncontrolled is celebrated, with the sE6160 compact shotgun microphone matched pair.Its handcrafted true condenser capsule delivers clean, natural sound with ultra-low noise, while the transformerless output maintains signal integrity over long cable runs. Exceptional off-axis rejection and high gain-before-feedback make it a strong fit for live sound reinforcement, theater, and on-location recording, where background noise and stage bleed can quickly compromise clarity. Switchable low-cut filters help reduce rumble and footfall noise, while also compensating for the proximity effect (increased bass response) when close-miking sources.Built with a rugged all-metal chassis and high-grade components, the sE6160 is made to hold up in real-world conditions, from concert stages to outdoor shoots. Its ability to handle high SPLs without distortion, along with selectable attenuation pads, makes it a great choice for unpredictable sources. For stereo capture, the sE6160 is also available as a matched pair (sold separately) that's ideal for audience miking, ambient recording, or concert documentation. SE Electronics Matched Pair of sE6160 Shotgun Microphones IncludesTwo microphonesTwo mic clips with thread adaptersTwo windscreensSoft caseSE Electronics Matched Pair of sE6160 Shotgun Microphones FeaturesHandcrafted true condenser capsuleTight polar pattern ensures high gain-before-feedback without colorizationSuperior sound quality provides a stunning in-ear mix and live recording at the same timeRoadworthy die-cast housing and solid construction for maximum robustnessSwitchable pre-attenuation padSwitchable low-cut filterAvailable as single or a factory-matched pairSE Electronics Matched Pair of sE6160 Shotgun Microphones SpecificationsCapsule: Hand-crafted small-diaphragm true condenser capsulePolar patterns: Shotgun (super-cardioid/lobar) Frequency range 20 – 20,000 HzSensitivity: 25 mV/Pa (-32 dBV)Max. SPL (0.5% THD): 137 / 147 / 157 dBSPL (0/10/20 dB attenuation pad)Equivalent noise level: 13 dB(A)Dynamic range: 124 / 134 / 144 dB (0/10/20 dB attenuation pad)Signal-to-noise ratio: 81 dBLow-cut filter: 80 / 160 Hz, 6 dB/oct, switchableAttenuation pad: 10 / 20 dB, switchablePowering: 48 Volts according to IEC 61938Electrical impedance: 110 OhmsRecommended load impedance: >1k OhmsCurrent consumption: 2.6 mAConnectivity: 3-pin male XLR connectorDimensions: 19.6 x 250 mm (ø x H) 0.77 x 9.84 in. (ø x H)Weight 110 g (3.88 oz.) SE Electronics Matched Pair of sE6160 Shotgun Microphones Shotgun Microphones for live audio, film production, broadcasting, theater, and podcasting..
Price now:
From
$809.89
To
$999.00
Price History:
Details:Se Electronics Se6160 Pair
Take control of audio captured in live environments where the uncontrolled is celebrated, with the sE6160 compact shotgun microphone matched pair.Its handcrafted true condenser capsule delivers clean, natural sound with ultra-low noise, while the transformerless output maintains signal integrity over long cable runs. Exceptional off-axis rejection and high gain-before-feedback make it a strong fit for live sound reinforcement, theater, and on-location recording, where background noise and stage bleed can quickly compromise clarity. Switchable low-cut filters help reduce rumble and footfall noise, while also compensating for the proximity effect (increased bass response) when close-miking sources.Built with a rugged all-metal chassis and high-grade components, the sE6160 is made to hold up in real-world conditions, from concert stages to outdoor shoots. Its ability to handle high SPLs without distortion, along with selectable attenuation pads, makes it a great choice for unpredictable sources. For stereo capture, the sE6160 is also available as a matched pair (sold separately) that's ideal for audience miking, ambient recording, or concert documentation. SE Electronics Matched Pair of sE6160 Shotgun Microphones IncludesTwo microphonesTwo mic clips with thread adaptersTwo windscreensSoft caseSE Electronics Matched Pair of sE6160 Shotgun Microphones FeaturesHandcrafted true condenser capsuleTight polar pattern ensures high gain-before-feedback without colorizationSuperior sound quality provides a stunning in-ear mix and live recording at the same timeRoadworthy die-cast housing and solid construction for maximum robustnessSwitchable pre-attenuation padSwitchable low-cut filterAvailable as single or a factory-matched pairSE Electronics Matched Pair of sE6160 Shotgun Microphones SpecificationsCapsule: Hand-crafted small-diaphragm true condenser capsulePolar patterns: Shotgun (super-cardioid/lobar) Frequency range 20 – 20,000 HzSensitivity: 25 mV/Pa (-32 dBV)Max. SPL (0.5% THD): 137 / 147 / 157 dBSPL (0/10/20 dB attenuation pad)Equivalent noise level: 13 dB(A)Dynamic range: 124 / 134 / 144 dB (0/10/20 dB attenuation pad)Signal-to-noise ratio: 81 dBLow-cut filter: 80 / 160 Hz, 6 dB/oct, switchableAttenuation pad: 10 / 20 dB, switchablePowering: 48 Volts according to IEC 61938Electrical impedance: 110 OhmsRecommended load impedance: >1k OhmsCurrent consumption: 2.6 mAConnectivity: 3-pin male XLR connectorDimensions: 19.6 x 250 mm (ø x H) 0.77 x 9.84 in. (ø x H)Weight 110 g (3.88 oz.) SE Electronics Matched Pair of sE6160 Shotgun Microphones Shotgun Microphones for live audio, film production, broadcasting, theater, and podcasting..
Price now:
From
$809.89
To
$999.00
This site contains affiliate links for which we may be compensated.
Reverb (US)
13.04% ( -$121.48)
Used
$809.89
$931.37
Full Compass Systems
0.00% (~ $$v)
New
$999.00
Reverb (US) | $809.89$9.50 Delivery | Store |
Reverb (US) | $999.00Free Delivery | Store |
Full Compass Systems | $999.00Free Delivery | Store |
Reverb (US) | $999.00Free Delivery | Store |
Reverb (US) | $999.00Free Delivery | Store |
Reverb (US) | $999.00Free Delivery | Store |
Currently Unavailable
Product Description
Take control of audio captured in live environments where the uncontrolled is celebrated, with the sE6160 compact shotgun microphone matched pair.Its handcrafted true condenser capsule delivers clean, natural sound with ultra-low noise, while the transformerless output maintains signal integrity over long cable runs. Exceptional off-axis rejection and high gain-before-feedback make it a strong fit for live sound reinforcement, theater, and on-location recording, where background noise and stage bleed can quickly compromise clarity. Switchable low-cut filters help reduce rumble and footfall noise, while also compensating for the proximity effect (increased bass response) when close-miking sources.Built with a rugged all-metal chassis and high-grade components, the sE6160 is made to hold up in real-world conditions, from concert stages to outdoor shoots. Its ability to handle high SPLs without distortion, along with selectable attenuation pads, makes it a great choice for unpredictable sources. For stereo capture, the sE6160 is also available as a matched pair (sold separately) that's ideal for audience miking, ambient recording, or concert documentation. SE Electronics Matched Pair of sE6160 Shotgun Microphones IncludesTwo microphonesTwo mic clips with thread adaptersTwo windscreensSoft caseSE Electronics Matched Pair of sE6160 Shotgun Microphones FeaturesHandcrafted true condenser capsuleTight polar pattern ensures high gain-before-feedback without colorizationSuperior sound quality provides a stunning in-ear mix and live recording at the same timeRoadworthy die-cast housing and solid construction for maximum robustnessSwitchable pre-attenuation padSwitchable low-cut filterAvailable as single or a factory-matched pairSE Electronics Matched Pair of sE6160 Shotgun Microphones SpecificationsCapsule: Hand-crafted small-diaphragm true condenser capsulePolar patterns: Shotgun (super-cardioid/lobar) Frequency range 20 – 20,000 HzSensitivity: 25 mV/Pa (-32 dBV)Max. SPL (0.5% THD): 137 / 147 / 157 dBSPL (0/10/20 dB attenuation pad)Equivalent noise level: 13 dB(A)Dynamic range: 124 / 134 / 144 dB (0/10/20 dB attenuation pad)Signal-to-noise ratio: 81 dBLow-cut filter: 80 / 160 Hz, 6 dB/oct, switchableAttenuation pad: 10 / 20 dB, switchablePowering: 48 Volts according to IEC 61938Electrical impedance: 110 OhmsRecommended load impedance: >1k OhmsCurrent consumption: 2.6 mAConnectivity: 3-pin male XLR connectorDimensions: 19.6 x 250 mm (ø x H) 0.77 x 9.84 in. (ø x H)Weight 110 g (3.88 oz.) SE Electronics Matched Pair of sE6160 Shotgun Microphones Shotgun Microphones for live audio, film production, broadcasting, theater, and podcasting..
Product Specifications
General | |
|---|---|
Brand | sE Electronics |
Gender | male |
Material | metal |
Size | extra small |
Color | black |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.