Focusrite Rednet Hd32r
The Focusrite RedNet HD32R is a 1U, 19" rack-mount Dante interface that allows Pro ToolsHD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system (sold separately) is connected to the HD32R via standard Mini DigiLink ports.From complex multi-room systems to single installations Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with HD32R providing the bridge to any Pro ToolsHD system. Assign any available Dante source or destination via HD32R and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.FeaturesAllows Dante Ethernet-based audio networking products to interoperate fully with Pro ToolsHD & Pro ToolsHDXEthernet and power supply redundancy with auto switchover in case of failure and locking connectorsProvides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro ToolsHDCost-effectively increase audio I/O quality and flexibility with RedNet interfacesPermits multiple workstations to access the same interface hardware and I/ONo changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro ToolsHD inputs and outputsUp to 32 I/O with Pro ToolsHD over single DigiLink connection per RedNet HD32RAdditional Avid/Digidesign interfaces may be connected to expansion portsUpgrade to RedNet interfaces while remaining fully compatible with TDM or AAX-DSP-based plugins and saved sessionsSpecificationsConnectors (Rear panel):2x etherCON locking Ethernet connectors – also compatible with standard RJ45 connectors2x BNC Word Clock In and Out2x BNC Loop Sync I/O Primary and Expansion Mini DigiLink connectors to/from Pro ToolsHD system2x IEC power connector: 100–240Vac, 50/60 Hz, cord retaining clips includedControls (front panel): Power on/offIndicators (front panel):Green LED power indicatorNetwork Status: Primary/Secondary/LockedPSU: A/BSample Rate: 44.1/48kHz, x2, x4, PullSignal Presence: From/to DAW, LED per 4 channelsClock Source: Internal, Loop Sync, Word Clock, DAW MasterSupported Systems (Requires Pro ToolsHD 8.0 and up):Pro ToolsHD PCIePro ToolsHDXPro ToolsHD Native PCIePro ToolsHD Native ThunderboltComputer Connectivity:IP NetworkForm Factor:RackmountSimultaneous I/O:8 x 8A/D Resolution:Up to 24-bit/192kHzBuilt In DSP/FX:YesAnalog Inputs:8 x XLRData I/O:2 x etherCON EthernetNumber of Preamps:8Phantom Power:YesRack Spaces:1UHeight:1.75"Width:19" Focusrite Pro RedNet HD32R Dante Audio Network Interface with 32x32 Pro Tools HD I/O.
Price now:
From
$1,599.99
To
$2,499.99
Price History:
Details:Focusrite Rednet Hd32r
The Focusrite RedNet HD32R is a 1U, 19" rack-mount Dante interface that allows Pro ToolsHD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system (sold separately) is connected to the HD32R via standard Mini DigiLink ports.From complex multi-room systems to single installations Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with HD32R providing the bridge to any Pro ToolsHD system. Assign any available Dante source or destination via HD32R and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.FeaturesAllows Dante Ethernet-based audio networking products to interoperate fully with Pro ToolsHD & Pro ToolsHDXEthernet and power supply redundancy with auto switchover in case of failure and locking connectorsProvides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro ToolsHDCost-effectively increase audio I/O quality and flexibility with RedNet interfacesPermits multiple workstations to access the same interface hardware and I/ONo changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro ToolsHD inputs and outputsUp to 32 I/O with Pro ToolsHD over single DigiLink connection per RedNet HD32RAdditional Avid/Digidesign interfaces may be connected to expansion portsUpgrade to RedNet interfaces while remaining fully compatible with TDM or AAX-DSP-based plugins and saved sessionsSpecificationsConnectors (Rear panel):2x etherCON locking Ethernet connectors – also compatible with standard RJ45 connectors2x BNC Word Clock In and Out2x BNC Loop Sync I/O Primary and Expansion Mini DigiLink connectors to/from Pro ToolsHD system2x IEC power connector: 100–240Vac, 50/60 Hz, cord retaining clips includedControls (front panel): Power on/offIndicators (front panel):Green LED power indicatorNetwork Status: Primary/Secondary/LockedPSU: A/BSample Rate: 44.1/48kHz, x2, x4, PullSignal Presence: From/to DAW, LED per 4 channelsClock Source: Internal, Loop Sync, Word Clock, DAW MasterSupported Systems (Requires Pro ToolsHD 8.0 and up):Pro ToolsHD PCIePro ToolsHDXPro ToolsHD Native PCIePro ToolsHD Native ThunderboltComputer Connectivity:IP NetworkForm Factor:RackmountSimultaneous I/O:8 x 8A/D Resolution:Up to 24-bit/192kHzBuilt In DSP/FX:YesAnalog Inputs:8 x XLRData I/O:2 x etherCON EthernetNumber of Preamps:8Phantom Power:YesRack Spaces:1UHeight:1.75"Width:19" Focusrite Pro RedNet HD32R Dante Audio Network Interface with 32x32 Pro Tools HD I/O.
Price now:
From
$1,599.99
To
$2,499.99
This site contains affiliate links for which we may be compensated.
Reverb (US)
0.00% (~ $$v)
New
$1,874.99
Reverb (US)
31.66% (+ $541.00)
New
$2,250.00
Full Compass Systems
0.00% (~ $$v)
New
$2,499.99
Reverb (US)
0.00% (~ $$v)
New
$2,499.99
Reverb (US) | $1,599.99Free Delivery | Store |
Reverb (US) | $1,874.99Free Delivery | Store |
Reverb (US) | $1,999.17$14.90 Delivery | Store |
Reverb (US) | $1,999.17$10.71 Delivery | Store |
Reverb (US) | $1,999.99Free Delivery | Store |
Reverb (US) | $2,250.00Free Delivery | Store |
Full Compass Systems | $2,499.99Free Delivery | Store |
Reverb (US) | $2,499.99Free Delivery | Store |
Reverb (US) | $2,499.99Free Delivery | Store |
Reverb (US) | $2,499.99Free Delivery | Store |
Reverb (US) | $2,499.99Free Delivery | Store |
Product Description
The Focusrite RedNet HD32R is a 1U, 19" rack-mount Dante interface that allows Pro ToolsHD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system (sold separately) is connected to the HD32R via standard Mini DigiLink ports.From complex multi-room systems to single installations Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with HD32R providing the bridge to any Pro ToolsHD system. Assign any available Dante source or destination via HD32R and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.FeaturesAllows Dante Ethernet-based audio networking products to interoperate fully with Pro ToolsHD & Pro ToolsHDXEthernet and power supply redundancy with auto switchover in case of failure and locking connectorsProvides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro ToolsHDCost-effectively increase audio I/O quality and flexibility with RedNet interfacesPermits multiple workstations to access the same interface hardware and I/ONo changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro ToolsHD inputs and outputsUp to 32 I/O with Pro ToolsHD over single DigiLink connection per RedNet HD32RAdditional Avid/Digidesign interfaces may be connected to expansion portsUpgrade to RedNet interfaces while remaining fully compatible with TDM or AAX-DSP-based plugins and saved sessionsSpecificationsConnectors (Rear panel):2x etherCON locking Ethernet connectors – also compatible with standard RJ45 connectors2x BNC Word Clock In and Out2x BNC Loop Sync I/O Primary and Expansion Mini DigiLink connectors to/from Pro ToolsHD system2x IEC power connector: 100–240Vac, 50/60 Hz, cord retaining clips includedControls (front panel): Power on/offIndicators (front panel):Green LED power indicatorNetwork Status: Primary/Secondary/LockedPSU: A/BSample Rate: 44.1/48kHz, x2, x4, PullSignal Presence: From/to DAW, LED per 4 channelsClock Source: Internal, Loop Sync, Word Clock, DAW MasterSupported Systems (Requires Pro ToolsHD 8.0 and up):Pro ToolsHD PCIePro ToolsHDXPro ToolsHD Native PCIePro ToolsHD Native ThunderboltComputer Connectivity:IP NetworkForm Factor:RackmountSimultaneous I/O:8 x 8A/D Resolution:Up to 24-bit/192kHzBuilt In DSP/FX:YesAnalog Inputs:8 x XLRData I/O:2 x etherCON EthernetNumber of Preamps:8Phantom Power:YesRack Spaces:1UHeight:1.75"Width:19" Focusrite Pro RedNet HD32R Dante Audio Network Interface with 32x32 Pro Tools HD I/O.
Product Specifications
General | |
|---|---|
Brand | Focusrite |
Color | red |
Size | 19in |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.