Rdl White/Gray Ds-Tpr2a Active 2-Pair Receiver, Twisted Pair Format-A, Phono Jack Outputs, Stainless
The Radio Design Labs D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes, and the D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.The Radio Design Labs D SERIES-TPR2A modules feature two RCA phono jack outputs - one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.This module receives signal from only two cable pairs, so the D SERIES-TPR2A modules have a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three Format-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all Format-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds much flexibility in the design of audio routing systems using RDL Format-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR2A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL Format-A features superior audio performance that rivals or exceeds shielded wiring. Simplicity, ease of installation, flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.Radio Design Labs DS-TPR2A Features:Two Unbalanced -10 dBV Phono Jack Audio OutputsL (Left) Output From Pair B; R (Right) From Pair CSignal and Power Pair Pass-Through on RJ45sRemote Powering through Twisted Pair CableFused Local Power Feeds all Connected ModulesLocal Power Input on Terminal BlockBlue LED Indicates Module is PoweredDaisy-Chain with Additional Format-A ReceiversStudio-Quality Precision Active Balanced CircuitryRadio Design Labs DS-TPR2A Specifications:Input: RDL FORMAT-AInput Connection:RJ45 (Models D-, DS-)Detachable Terminal Block (Model EM-)Format-A Signal Pairs Used (2):B (Left)C (Right)Format-A Output: RJ45 (not applicable to EM-)Output: 100 Ohm unbalancedOutput Connection: RCA PhonoFrequency Response: 10 Hz to 50 kHz (± 0.1 dB)THD+N:18 dBCMRR: >80 dB (50 Hz to 150 Hz)Indicator: Power InPower Connections (2): Detachable terminal block; RJ45Ambient Operating Environment: 0° C to 55° CPower Requirement: 24 Vdc @ 45 mA plus connected loadsDimensions:1.6" (4.06 cm) W4.11" (10.45 cm) H1.89" (4.8 cm) DMounting Box Minimum Depth:2.4" (Models D-, DS-)39 mm (Model EM-)Package Type: Cardboard BoxPackage Dimensions: 3.625 x 4.625 x 2.125 in.Shipping Weight: 0.395 lbs.WEEE weight: 0.245 lbs.Tariff code: 8517.18.0000 RDL DS-TPR2A Active 2-Pair Receiver, Twisted Pair Format-A, Phono Jack Outputs, Stainless.
Price now:
From
$236.89
To
$243.99
Price History:
Details:Rdl White/Gray Ds-Tpr2a Active 2-Pair Receiver, Twisted Pair Format-A, Phono Jack Outputs, Stainless
The Radio Design Labs D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes, and the D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.The Radio Design Labs D SERIES-TPR2A modules feature two RCA phono jack outputs - one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.This module receives signal from only two cable pairs, so the D SERIES-TPR2A modules have a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three Format-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all Format-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds much flexibility in the design of audio routing systems using RDL Format-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR2A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL Format-A features superior audio performance that rivals or exceeds shielded wiring. Simplicity, ease of installation, flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.Radio Design Labs DS-TPR2A Features:Two Unbalanced -10 dBV Phono Jack Audio OutputsL (Left) Output From Pair B; R (Right) From Pair CSignal and Power Pair Pass-Through on RJ45sRemote Powering through Twisted Pair CableFused Local Power Feeds all Connected ModulesLocal Power Input on Terminal BlockBlue LED Indicates Module is PoweredDaisy-Chain with Additional Format-A ReceiversStudio-Quality Precision Active Balanced CircuitryRadio Design Labs DS-TPR2A Specifications:Input: RDL FORMAT-AInput Connection:RJ45 (Models D-, DS-)Detachable Terminal Block (Model EM-)Format-A Signal Pairs Used (2):B (Left)C (Right)Format-A Output: RJ45 (not applicable to EM-)Output: 100 Ohm unbalancedOutput Connection: RCA PhonoFrequency Response: 10 Hz to 50 kHz (± 0.1 dB)THD+N:18 dBCMRR: >80 dB (50 Hz to 150 Hz)Indicator: Power InPower Connections (2): Detachable terminal block; RJ45Ambient Operating Environment: 0° C to 55° CPower Requirement: 24 Vdc @ 45 mA plus connected loadsDimensions:1.6" (4.06 cm) W4.11" (10.45 cm) H1.89" (4.8 cm) DMounting Box Minimum Depth:2.4" (Models D-, DS-)39 mm (Model EM-)Package Type: Cardboard BoxPackage Dimensions: 3.625 x 4.625 x 2.125 in.Shipping Weight: 0.395 lbs.WEEE weight: 0.245 lbs.Tariff code: 8517.18.0000 RDL DS-TPR2A Active 2-Pair Receiver, Twisted Pair Format-A, Phono Jack Outputs, Stainless.
Price now:
From
$236.89
To
$243.99
This site contains affiliate links for which we may be compensated.
Full Compass Systems
6.33% (+ $14.11)
New
$236.89
Full Compass Systems | $236.89Free Delivery | Store |
Reverb (US) | $243.99Free Delivery | Store |
Product Description
The Radio Design Labs D SERIES-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The -TPR2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes, and the D-TPR2A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.The Radio Design Labs D SERIES-TPR2A modules feature two RCA phono jack outputs - one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.This module receives signal from only two cable pairs, so the D SERIES-TPR2A modules have a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three Format-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all Format-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds much flexibility in the design of audio routing systems using RDL Format-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.The D SERIES-TPR2A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.RDL Format-A features superior audio performance that rivals or exceeds shielded wiring. Simplicity, ease of installation, flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.Radio Design Labs DS-TPR2A Features:Two Unbalanced -10 dBV Phono Jack Audio OutputsL (Left) Output From Pair B; R (Right) From Pair CSignal and Power Pair Pass-Through on RJ45sRemote Powering through Twisted Pair CableFused Local Power Feeds all Connected ModulesLocal Power Input on Terminal BlockBlue LED Indicates Module is PoweredDaisy-Chain with Additional Format-A ReceiversStudio-Quality Precision Active Balanced CircuitryRadio Design Labs DS-TPR2A Specifications:Input: RDL FORMAT-AInput Connection:RJ45 (Models D-, DS-)Detachable Terminal Block (Model EM-)Format-A Signal Pairs Used (2):B (Left)C (Right)Format-A Output: RJ45 (not applicable to EM-)Output: 100 Ohm unbalancedOutput Connection: RCA PhonoFrequency Response: 10 Hz to 50 kHz (± 0.1 dB)THD+N:18 dBCMRR: >80 dB (50 Hz to 150 Hz)Indicator: Power InPower Connections (2): Detachable terminal block; RJ45Ambient Operating Environment: 0° C to 55° CPower Requirement: 24 Vdc @ 45 mA plus connected loadsDimensions:1.6" (4.06 cm) W4.11" (10.45 cm) H1.89" (4.8 cm) DMounting Box Minimum Depth:2.4" (Models D-, DS-)39 mm (Model EM-)Package Type: Cardboard BoxPackage Dimensions: 3.625 x 4.625 x 2.125 in.Shipping Weight: 0.395 lbs.WEEE weight: 0.245 lbs.Tariff code: 8517.18.0000 RDL DS-TPR2A Active 2-Pair Receiver, Twisted Pair Format-A, Phono Jack Outputs, Stainless.
Product Specifications
General | |
|---|---|
Color | white/gray |
Material | stainless steel/cardboard |
Size | 2 |
Brand | RDL |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.