Ashly Fx750.4 4-Channel Power Amplifier With Dsp
Enhance efficiency, optimize space utilization, and reduce installation costs with the Ashly FX750.4, a versatile installation amplifier equipped with integrated DSP capabilities. This advanced amplifier boasts a built-in Wireless Access Point (WAP) hotspot, facilitating effortless connectivity and configuration via Wi-Fi, coupled with an intuitive web-based software user interface. Additionally, the amplifier incorporates an Ethernet connection for wired Local Area Network (LAN) connections, eliminating the need for a dedicated network router.The four-channel Class-D amplifier harnesses a formidable 750W of power per channel or an impressive 1500W when bridging two channels. The onboard DSP module encompasses the comprehensive functionalities of a standalone speaker processor, encompassing features such as EQ (Equalization), delay, compression, limiting, phase adjustments, and more. This integrated solution simplifies the setup and navigation process. The FX750.4 package includes a pair of rack ears, a power cord, and block connectors for added convenience and versatility.Ashly FX750.4 Features:Built-In Wireless-Access-Point (WAP)750 W per Channel or 1500 W Bridged2/4/8 Ohms, 25/70/100 VClass-D CircuitryRCA and Euroblock Analog InputsS/PDIF RCA I/O + Euroblock Speaker OutEuroblock GPIO Connector + EthernetFan Cooling + Protection CircuitryIncludes Power Cord and Block ConnectorsAshly FX750.4 Specifications:Output Power @ 4ω/8ω: @2ω: 4 x 750 W (SE), @4ω: 4 x 750 W (SE), 1 x 1500 W (BTL), @8ω: 4 x 375 W (SE), 1 x 1500 W (BTL)Channels: 4 x Lo-Z / 2 x Hi-ZOutput Power @ 70 V / 100 V: 2 x 1500 WPowershare (Up to): N/ATotal System Power: 3000 WDSP: 4 Input x 2 or 4 Outputs: Input, Zone, Output & Speaker Processing, plus General settingsNetworking: Browser-based UI Software with Ethernet & WiFi connectivityPower Consumption: 1100 WDimension: 19 x 8.5 x 12.6 inWeight: 16.5 lbsOutput Circuitry: Class D - full bandwidth P WM modulator with ultra-low distortionOutput Voltage: 80 Vp / 170 Vpp (unloaded) // Bridged 170 Vp / 340 Vpp (unloaded)Signal to Noise-Ratio: >108 dB (A-weighted, 20 Hz – 20 kHz, 8 ω load)THD-N (Typical):< 0.05% (20 Hz – 20 kHz, 8 ω load, 3 dB below rated power)Frequency Response: 20 Hz – 20 kHz (+/- 0.5 dB, 8 ω load, 3 dB below rated power)Protection Circuits: Short circuit , DC , Under voltage , Temperature - and Overload protectionPower Supply: UREC universal mains switch mode power supply with Power Factor Correction (PFC) and standby converterOperating Temperature: 32° – 104° FOperating Voltage/Frequency: Universal Mains, 100V - 240V, 50Hz - 60HzStandby Consumption:< 0.5 WAccessories: Rack Ears (Included)Power Ratings: 1 % THD @ 120 Vac and 230 Vac Ashly FX750.4 4-Channel Power Amplifier with DSP.
Price now:
$1,679.00
Price History:
Details:Ashly Fx750.4 4-Channel Power Amplifier With Dsp
Enhance efficiency, optimize space utilization, and reduce installation costs with the Ashly FX750.4, a versatile installation amplifier equipped with integrated DSP capabilities. This advanced amplifier boasts a built-in Wireless Access Point (WAP) hotspot, facilitating effortless connectivity and configuration via Wi-Fi, coupled with an intuitive web-based software user interface. Additionally, the amplifier incorporates an Ethernet connection for wired Local Area Network (LAN) connections, eliminating the need for a dedicated network router.The four-channel Class-D amplifier harnesses a formidable 750W of power per channel or an impressive 1500W when bridging two channels. The onboard DSP module encompasses the comprehensive functionalities of a standalone speaker processor, encompassing features such as EQ (Equalization), delay, compression, limiting, phase adjustments, and more. This integrated solution simplifies the setup and navigation process. The FX750.4 package includes a pair of rack ears, a power cord, and block connectors for added convenience and versatility.Ashly FX750.4 Features:Built-In Wireless-Access-Point (WAP)750 W per Channel or 1500 W Bridged2/4/8 Ohms, 25/70/100 VClass-D CircuitryRCA and Euroblock Analog InputsS/PDIF RCA I/O + Euroblock Speaker OutEuroblock GPIO Connector + EthernetFan Cooling + Protection CircuitryIncludes Power Cord and Block ConnectorsAshly FX750.4 Specifications:Output Power @ 4ω/8ω: @2ω: 4 x 750 W (SE), @4ω: 4 x 750 W (SE), 1 x 1500 W (BTL), @8ω: 4 x 375 W (SE), 1 x 1500 W (BTL)Channels: 4 x Lo-Z / 2 x Hi-ZOutput Power @ 70 V / 100 V: 2 x 1500 WPowershare (Up to): N/ATotal System Power: 3000 WDSP: 4 Input x 2 or 4 Outputs: Input, Zone, Output & Speaker Processing, plus General settingsNetworking: Browser-based UI Software with Ethernet & WiFi connectivityPower Consumption: 1100 WDimension: 19 x 8.5 x 12.6 inWeight: 16.5 lbsOutput Circuitry: Class D - full bandwidth P WM modulator with ultra-low distortionOutput Voltage: 80 Vp / 170 Vpp (unloaded) // Bridged 170 Vp / 340 Vpp (unloaded)Signal to Noise-Ratio: >108 dB (A-weighted, 20 Hz – 20 kHz, 8 ω load)THD-N (Typical):< 0.05% (20 Hz – 20 kHz, 8 ω load, 3 dB below rated power)Frequency Response: 20 Hz – 20 kHz (+/- 0.5 dB, 8 ω load, 3 dB below rated power)Protection Circuits: Short circuit , DC , Under voltage , Temperature - and Overload protectionPower Supply: UREC universal mains switch mode power supply with Power Factor Correction (PFC) and standby converterOperating Temperature: 32° – 104° FOperating Voltage/Frequency: Universal Mains, 100V - 240V, 50Hz - 60HzStandby Consumption:< 0.5 WAccessories: Rack Ears (Included)Power Ratings: 1 % THD @ 120 Vac and 230 Vac Ashly FX750.4 4-Channel Power Amplifier with DSP.
Price now:
$1,679.00
This site contains affiliate links for which we may be compensated.
Full Compass Systems
30.01% ( -$720.00)
New
$1,679.00
Reverb (US) | $1,679.00Free Delivery | Store |
Full Compass Systems | $1,679.00Free Delivery | Store |
Product Description
Enhance efficiency, optimize space utilization, and reduce installation costs with the Ashly FX750.4, a versatile installation amplifier equipped with integrated DSP capabilities. This advanced amplifier boasts a built-in Wireless Access Point (WAP) hotspot, facilitating effortless connectivity and configuration via Wi-Fi, coupled with an intuitive web-based software user interface. Additionally, the amplifier incorporates an Ethernet connection for wired Local Area Network (LAN) connections, eliminating the need for a dedicated network router.The four-channel Class-D amplifier harnesses a formidable 750W of power per channel or an impressive 1500W when bridging two channels. The onboard DSP module encompasses the comprehensive functionalities of a standalone speaker processor, encompassing features such as EQ (Equalization), delay, compression, limiting, phase adjustments, and more. This integrated solution simplifies the setup and navigation process. The FX750.4 package includes a pair of rack ears, a power cord, and block connectors for added convenience and versatility.Ashly FX750.4 Features:Built-In Wireless-Access-Point (WAP)750 W per Channel or 1500 W Bridged2/4/8 Ohms, 25/70/100 VClass-D CircuitryRCA and Euroblock Analog InputsS/PDIF RCA I/O + Euroblock Speaker OutEuroblock GPIO Connector + EthernetFan Cooling + Protection CircuitryIncludes Power Cord and Block ConnectorsAshly FX750.4 Specifications:Output Power @ 4ω/8ω: @2ω: 4 x 750 W (SE), @4ω: 4 x 750 W (SE), 1 x 1500 W (BTL), @8ω: 4 x 375 W (SE), 1 x 1500 W (BTL)Channels: 4 x Lo-Z / 2 x Hi-ZOutput Power @ 70 V / 100 V: 2 x 1500 WPowershare (Up to): N/ATotal System Power: 3000 WDSP: 4 Input x 2 or 4 Outputs: Input, Zone, Output & Speaker Processing, plus General settingsNetworking: Browser-based UI Software with Ethernet & WiFi connectivityPower Consumption: 1100 WDimension: 19 x 8.5 x 12.6 inWeight: 16.5 lbsOutput Circuitry: Class D - full bandwidth P WM modulator with ultra-low distortionOutput Voltage: 80 Vp / 170 Vpp (unloaded) // Bridged 170 Vp / 340 Vpp (unloaded)Signal to Noise-Ratio: >108 dB (A-weighted, 20 Hz – 20 kHz, 8 ω load)THD-N (Typical):< 0.05% (20 Hz – 20 kHz, 8 ω load, 3 dB below rated power)Frequency Response: 20 Hz – 20 kHz (+/- 0.5 dB, 8 ω load, 3 dB below rated power)Protection Circuits: Short circuit , DC , Under voltage , Temperature - and Overload protectionPower Supply: UREC universal mains switch mode power supply with Power Factor Correction (PFC) and standby converterOperating Temperature: 32° – 104° FOperating Voltage/Frequency: Universal Mains, 100V - 240V, 50Hz - 60HzStandby Consumption:< 0.5 WAccessories: Rack Ears (Included)Power Ratings: 1 % THD @ 120 Vac and 230 Vac Ashly FX750.4 4-Channel Power Amplifier with DSP.
Product Specifications
General | |
|---|---|
Brand | Ashly |
Material | mode |
Size | 4 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.