Ashly Fx60.2 2 Channel Power Amplifier With Dsp
The convenience of Wi-Fi and the power of Ashly engineering make the FX series of multi-purpose DSP installation amplifiers the right choice for retail, hospitality, restaurant, and corporate audio processing. Integrated digital signal processing allows the FX60.2 to fit a wide range of applications without requiring additional equipment. Featuring four inputs, four assignable zones, and two outputs with 60W per channel, the FX60.2 provides extreme flexibility to installers. Plus the unit accepts both low and high-impedance inputs with the ability to power low impedance (4 Ohms/8 Ohms) or 70/100V lines. Setup, configuration, and updates can be accomplished from your computer, laptop, or smart device (sold separately) via Ashly's powerful, intuitive web-based interface. Small but powerful, the FX60.2 fits in a standard half-rack space and gives you full control over virtually any loudspeaker from the palm of your hand. Make your life easier and your sound better with the FX60.2.Ashly FX60.2 Applications:Conference/Huddle RoomsClassrooms, lecturesRetailHospitalityInside Displays & KiosksBars and RestaurantsTrade Show ExhibitsHouse of worshipAshly FX60.2 Features:60W x 2 channels in ½ RU chassisLow (2*/4/8 Ohm) or Hi Impedance (70/100V) operation, selectable in softwareBalanced Mic/Line inputs on removeable Euroblock connectors, plus unbalanced RCA inputs2-channel SPDIF Digital IOFront panel status LEDs for amp, Input, output & networkAdvanced Dynamic Power Sharing distributes power between channelsNetworkable via Ethernet or built-in WiFiBuilt-in advanced DSP on all inputs & outputs, including: Sensitivity, Routing, Gain, PEQ, Compressor, Limiter, FIR Filters, X-Over, Polarity & DelayBrowser-based UI accessed via PC or mobile device. No software to install.4 Input channelsCustomized Speaker Presets made be created, saved & loaded for each output channel½ RU models easy to hide in “non-rack” installations*FX 500 models only** 4x power is for FX 60.4 only. Other models are up to 2 x power between pairs. Spec is total power with a single channel driven.Ashly FX60.2 Specifications:Outputs: 2 Low-Z or 1 Hi-ZOutput power @ 4Ω/8Ω/25V†/70V/100V* All channels driven: 60W Low-Z, 120W Hi-ZOutput power @ 4Ω/8Ω/25V†/70V/100V* Single channel driven: 120W**Output power @ 16Ω*** Single channel driven: 120WPower Consumption: 75WThermal Output (BTU/hr, 1/8th Full Power, 4Ω Load): 61Dimensions: 44 x 220 x 213 mm (1.7 x 8.7 x 8.4 in)Weight: 2.0 kg (4.4 lbs)Output Circuitry: Class D - full bandwidth PWM modulator with ultra-low distortionOutput Voltage: 70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded)Signal To Noise-Ratio: >106 dB (A-weighted 20 Hz - 20 kHz 8 Ω load)THD+N (typical):4Ωkit, WR-1 & WR-1.1 GPIO Remote Volume Control Ashly FX 60.2 1/2-Rack Compact 2-Channel Power Amplifier with DSP.
Price now:
From
$499.00
To
$749.00
Price History:
Details:Ashly Fx60.2 2 Channel Power Amplifier With Dsp
The convenience of Wi-Fi and the power of Ashly engineering make the FX series of multi-purpose DSP installation amplifiers the right choice for retail, hospitality, restaurant, and corporate audio processing. Integrated digital signal processing allows the FX60.2 to fit a wide range of applications without requiring additional equipment. Featuring four inputs, four assignable zones, and two outputs with 60W per channel, the FX60.2 provides extreme flexibility to installers. Plus the unit accepts both low and high-impedance inputs with the ability to power low impedance (4 Ohms/8 Ohms) or 70/100V lines. Setup, configuration, and updates can be accomplished from your computer, laptop, or smart device (sold separately) via Ashly's powerful, intuitive web-based interface. Small but powerful, the FX60.2 fits in a standard half-rack space and gives you full control over virtually any loudspeaker from the palm of your hand. Make your life easier and your sound better with the FX60.2.Ashly FX60.2 Applications:Conference/Huddle RoomsClassrooms, lecturesRetailHospitalityInside Displays & KiosksBars and RestaurantsTrade Show ExhibitsHouse of worshipAshly FX60.2 Features:60W x 2 channels in ½ RU chassisLow (2*/4/8 Ohm) or Hi Impedance (70/100V) operation, selectable in softwareBalanced Mic/Line inputs on removeable Euroblock connectors, plus unbalanced RCA inputs2-channel SPDIF Digital IOFront panel status LEDs for amp, Input, output & networkAdvanced Dynamic Power Sharing distributes power between channelsNetworkable via Ethernet or built-in WiFiBuilt-in advanced DSP on all inputs & outputs, including: Sensitivity, Routing, Gain, PEQ, Compressor, Limiter, FIR Filters, X-Over, Polarity & DelayBrowser-based UI accessed via PC or mobile device. No software to install.4 Input channelsCustomized Speaker Presets made be created, saved & loaded for each output channel½ RU models easy to hide in “non-rack” installations*FX 500 models only** 4x power is for FX 60.4 only. Other models are up to 2 x power between pairs. Spec is total power with a single channel driven.Ashly FX60.2 Specifications:Outputs: 2 Low-Z or 1 Hi-ZOutput power @ 4Ω/8Ω/25V†/70V/100V* All channels driven: 60W Low-Z, 120W Hi-ZOutput power @ 4Ω/8Ω/25V†/70V/100V* Single channel driven: 120W**Output power @ 16Ω*** Single channel driven: 120WPower Consumption: 75WThermal Output (BTU/hr, 1/8th Full Power, 4Ω Load): 61Dimensions: 44 x 220 x 213 mm (1.7 x 8.7 x 8.4 in)Weight: 2.0 kg (4.4 lbs)Output Circuitry: Class D - full bandwidth PWM modulator with ultra-low distortionOutput Voltage: 70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded)Signal To Noise-Ratio: >106 dB (A-weighted 20 Hz - 20 kHz 8 Ω load)THD+N (typical):4Ωkit, WR-1 & WR-1.1 GPIO Remote Volume Control Ashly FX 60.2 1/2-Rack Compact 2-Channel Power Amplifier with DSP.
Price now:
From
$499.00
To
$749.00
This site contains affiliate links for which we may be compensated.
Full Compass Systems
28.61% ( -$200.00)
New
$499.00
Full Compass Systems | $499.00Free Delivery | Store |
Reverb (US) | $499.00Free Delivery | Store |
Reverb (US) | $749.00Free Delivery | Store |
Currently Unavailable
Product Description
The convenience of Wi-Fi and the power of Ashly engineering make the FX series of multi-purpose DSP installation amplifiers the right choice for retail, hospitality, restaurant, and corporate audio processing. Integrated digital signal processing allows the FX60.2 to fit a wide range of applications without requiring additional equipment. Featuring four inputs, four assignable zones, and two outputs with 60W per channel, the FX60.2 provides extreme flexibility to installers. Plus the unit accepts both low and high-impedance inputs with the ability to power low impedance (4 Ohms/8 Ohms) or 70/100V lines. Setup, configuration, and updates can be accomplished from your computer, laptop, or smart device (sold separately) via Ashly's powerful, intuitive web-based interface. Small but powerful, the FX60.2 fits in a standard half-rack space and gives you full control over virtually any loudspeaker from the palm of your hand. Make your life easier and your sound better with the FX60.2.Ashly FX60.2 Applications:Conference/Huddle RoomsClassrooms, lecturesRetailHospitalityInside Displays & KiosksBars and RestaurantsTrade Show ExhibitsHouse of worshipAshly FX60.2 Features:60W x 2 channels in ½ RU chassisLow (2*/4/8 Ohm) or Hi Impedance (70/100V) operation, selectable in softwareBalanced Mic/Line inputs on removeable Euroblock connectors, plus unbalanced RCA inputs2-channel SPDIF Digital IOFront panel status LEDs for amp, Input, output & networkAdvanced Dynamic Power Sharing distributes power between channelsNetworkable via Ethernet or built-in WiFiBuilt-in advanced DSP on all inputs & outputs, including: Sensitivity, Routing, Gain, PEQ, Compressor, Limiter, FIR Filters, X-Over, Polarity & DelayBrowser-based UI accessed via PC or mobile device. No software to install.4 Input channelsCustomized Speaker Presets made be created, saved & loaded for each output channel½ RU models easy to hide in “non-rack” installations*FX 500 models only** 4x power is for FX 60.4 only. Other models are up to 2 x power between pairs. Spec is total power with a single channel driven.Ashly FX60.2 Specifications:Outputs: 2 Low-Z or 1 Hi-ZOutput power @ 4Ω/8Ω/25V†/70V/100V* All channels driven: 60W Low-Z, 120W Hi-ZOutput power @ 4Ω/8Ω/25V†/70V/100V* Single channel driven: 120W**Output power @ 16Ω*** Single channel driven: 120WPower Consumption: 75WThermal Output (BTU/hr, 1/8th Full Power, 4Ω Load): 61Dimensions: 44 x 220 x 213 mm (1.7 x 8.7 x 8.4 in)Weight: 2.0 kg (4.4 lbs)Output Circuitry: Class D - full bandwidth PWM modulator with ultra-low distortionOutput Voltage: 70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded)Signal To Noise-Ratio: >106 dB (A-weighted 20 Hz - 20 kHz 8 Ω load)THD+N (typical):4Ωkit, WR-1 & WR-1.1 GPIO Remote Volume Control Ashly FX 60.2 1/2-Rack Compact 2-Channel Power Amplifier with DSP.
Product Specifications
General | |
|---|---|
Size | extra small |
Brand | Ashly |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.