The PowerStage 200 is a compact, 200-watt pedal-sized guitar amp built for players who want clean, reliable power with tons of headroom but are tired of hauling around a 50lb. 100 Watt head to get it. If you forge your tone with modelers, stompboxes, or both, the PS200 gives you the wide-open headroom your tone needs to shine, warm, organic, and consistent at any volume, from basement woodshedding to full-on live gigs. Only slightly larger than two pedals side by side, it fits on your board or in your gig bag, making it a perfect grab-and-go amp for rehearsals, tours, or fly dates where every inch of space counts.The PS200 adds player-focused features tailored for the working guitarist: two speaker outputs with automatic impedance handling, a built-in cab sim with DI output for sending your sound direct to FOH or a monitor mix, and bypass switches for both EQ and cab sim so you can integrate your own tools or IRs. Four bands of EQ—including a presence control to dial in sparkle or smooth out harsh modeler tones—let you adapt to any room or setup quickly. An Aux In and headphone out with independent volume make silent practice, hotel-room jams, and late-night writing sessions simple, all with the same clear, full sound you’d expect live.Like the rest of the PowerStage family, the PS200 delivers crystal-clear amplification that feels as musical and dimensional as a great tube amp—without the weight, sweet-spot limitations, or maintenance. Built in Santa Barbara by the same team behind Seymour Duncan’s legendary pickups, the PowerStage 200 gives you powerful, portable tone you can trust night after night.Seymour Duncan Power Stage 200 Features200 WattsCab sim3 band EQ with presence controlIndependent bypass switches for cab sim and EQ2 speaker outputsDI (XLR) OutputAux InInternal power supplyPre-amp and power amp clip lights to dial in your levelsSeymour Duncan Power Stage 200 SpecificationsPOWER SPECIFICATIONS Maximum Output Power 4Ω load – 210W @ 1% THD+N, 1kHz 4Ω load – 255W @ 10% THD+N, 1kHz 8Ω load – 117W @ 1% THD+N, 1kHz Continuous Output Power without thermal shutdown @ 120VAC/60Hz – 140W @ 230VAC/50Hz – 130W Nominal Mains voltage: 100 to 240 VAC, 50/60 Hz Maximum Input Power: 400W Max Total Power Efficiency Po = 200W - 78% AUDIO SPECIFICATIONS Speaker Outputs THD + N @ 1kHz, full rated power - ≤1% THD + N @ 1kHz, 10V out, 4Ω load – 0.003% Output referenced idle noise – ≤92µV, A-weighted Dynamic Range, A-weighted – 109dB Bandwidth – 5 Hz to 50 kHz ± 3 dB, 20 Hz to 20kHz @ nominal power EQ Parameters Bass +/- 10 dB @ 87 Hz Midrange +/- 10 dB @ 645 Hz Treble +/- 8.5 dB @ 4.4 kHz Presence +/- 6.8 dB @ 11.6 kHzENVIRONMENTAL SPECIFICATIONS Ambient Operating Temperature – 0° to 50°C Relative Humidity – 85%, non-condensing Altitude, operating – 2000m (6500 ft.) Weight – 2.87 lbs. Seymour Duncan Power Stage 200 Pedalboard Guitar Amp, 200 Watts.