Bogen Communications Bogen M600 600 Watt Amp
Bogen's M-Class series is designed for reliability, flexibility, and power, and features three modes of operation: Stereo, 70V Mono, or Dual Mono; and 2 modular input bays for a variety of prioritized input types. Additional features include Bogen's patented Back-Slope circuitry for regulating the proper amount of AC energy from the amplifier's power toroid, an energy-saving Sleep Mode, and support for up to two input modules with up to two priority settings with the ability to add other modules as needed.Bogen M600 Features:3 modes of operation to choose from - Stereo, Dual Mono, or 70V MonoLow noise, low distortion, and high slew rateFlexible modular input capability (2 module capacity)Professional, dual-channel (balanced or unbalanced), high-impedance input module with gain selection included3 selectable low-frequency, roll-off choices2x1 mixer function when in mono modesInsert connections for outboard equipment (in mono modes)Post- and Pre-EQ Output Feeds (summed mono out in stereo mode)DC, overload, short circuit, and thermal protection circuits Clip limiting circuits for speaker protectionPower-saving Sleep Mode for intermittent use applicationsStatus, Signal, and Clip/Limit indicatorsBack-Slope AC voltage stabilization for dependable performance over varying AC line voltagesHeavy-gauge steel chassis with cast aluminum front panelRecessed volume control knobs with snap-on protective coverMounts in 2 rack spaces (3-1/2") directly stackable without need for extra space above or below2 independent, continuously variable, cooling fans for dependable and quiet operationEasily removable front fan grilles with filtersStable into 2-ohm loadsBogen M600 Specifications:Power Output:70V Mono: 1200W @ 4 ohms4-ohm: 600W per channel8-ohm: 400W per channelInput Sensitivity: 1.161V for 600W @ 4 ohmsS/N Ratio (20K BW): 109 dB ref. 8 ohms, F.P.Class of Operation: HProduct Weight: 46 lbsConnectors:Power: 20A line cordInput: 2 new Bogen std. 12-pin connector modules/RCA inputOutput: 5-pin "touch-proof" Barrier Strip, RCAPre- & Post-EQ OutputPower Bandwidth: 20-40kHz .5% THDTHD @ 1 kHz rated power: less than .02%Load Impedance: 4-8 ohms, 70VMinimum Load Impedance (Stereo): 3.2 ohmsFrequency Response @ 1 watt: 20-20kHz +/-0.25dBOutput Regulation:1kHz Direct: 0.5dB @ 8 ohms1kHz Bridged: 1.5dB @70VInputs (Plug-in modules): Electronically balanced, high-impedance module standard, other modular input types availableAC Input Voltage Range: 95-130V AC, 60HzMaximum AC Current: 20AIndicators: Status (On/Protect/Sleep), Clip/Limit, SignalTemperature Range: 15 to 105 degrees FCooling: Forced Air Variable Speed FanDimensions (WxHxD): 17" x 3 1/2" x 16"Protection: RF, DC, Low-frequency, Thermal, Low-Impedance, Circuit-Breaker, Short CircuitSpecial Features: Sleep Mode, Back-Slode regulation, Stereo, Dual Mono,70V Mono Operation, Toroidal Power Transformer Bogen M600 2-Channel Power Amplifier, 600W at 4 Ohms.
Price now:
From
$1,766.08
To
$1,804.12
Price History:
Details:Bogen Communications Bogen M600 600 Watt Amp
Bogen's M-Class series is designed for reliability, flexibility, and power, and features three modes of operation: Stereo, 70V Mono, or Dual Mono; and 2 modular input bays for a variety of prioritized input types. Additional features include Bogen's patented Back-Slope circuitry for regulating the proper amount of AC energy from the amplifier's power toroid, an energy-saving Sleep Mode, and support for up to two input modules with up to two priority settings with the ability to add other modules as needed.Bogen M600 Features:3 modes of operation to choose from - Stereo, Dual Mono, or 70V MonoLow noise, low distortion, and high slew rateFlexible modular input capability (2 module capacity)Professional, dual-channel (balanced or unbalanced), high-impedance input module with gain selection included3 selectable low-frequency, roll-off choices2x1 mixer function when in mono modesInsert connections for outboard equipment (in mono modes)Post- and Pre-EQ Output Feeds (summed mono out in stereo mode)DC, overload, short circuit, and thermal protection circuits Clip limiting circuits for speaker protectionPower-saving Sleep Mode for intermittent use applicationsStatus, Signal, and Clip/Limit indicatorsBack-Slope AC voltage stabilization for dependable performance over varying AC line voltagesHeavy-gauge steel chassis with cast aluminum front panelRecessed volume control knobs with snap-on protective coverMounts in 2 rack spaces (3-1/2") directly stackable without need for extra space above or below2 independent, continuously variable, cooling fans for dependable and quiet operationEasily removable front fan grilles with filtersStable into 2-ohm loadsBogen M600 Specifications:Power Output:70V Mono: 1200W @ 4 ohms4-ohm: 600W per channel8-ohm: 400W per channelInput Sensitivity: 1.161V for 600W @ 4 ohmsS/N Ratio (20K BW): 109 dB ref. 8 ohms, F.P.Class of Operation: HProduct Weight: 46 lbsConnectors:Power: 20A line cordInput: 2 new Bogen std. 12-pin connector modules/RCA inputOutput: 5-pin "touch-proof" Barrier Strip, RCAPre- & Post-EQ OutputPower Bandwidth: 20-40kHz .5% THDTHD @ 1 kHz rated power: less than .02%Load Impedance: 4-8 ohms, 70VMinimum Load Impedance (Stereo): 3.2 ohmsFrequency Response @ 1 watt: 20-20kHz +/-0.25dBOutput Regulation:1kHz Direct: 0.5dB @ 8 ohms1kHz Bridged: 1.5dB @70VInputs (Plug-in modules): Electronically balanced, high-impedance module standard, other modular input types availableAC Input Voltage Range: 95-130V AC, 60HzMaximum AC Current: 20AIndicators: Status (On/Protect/Sleep), Clip/Limit, SignalTemperature Range: 15 to 105 degrees FCooling: Forced Air Variable Speed FanDimensions (WxHxD): 17" x 3 1/2" x 16"Protection: RF, DC, Low-frequency, Thermal, Low-Impedance, Circuit-Breaker, Short CircuitSpecial Features: Sleep Mode, Back-Slode regulation, Stereo, Dual Mono,70V Mono Operation, Toroidal Power Transformer Bogen M600 2-Channel Power Amplifier, 600W at 4 Ohms.
Price now:
From
$1,766.08
To
$1,804.12
This site contains affiliate links for which we may be compensated.
Full Compass Systems
2.89% ( -$53.52)
New
$1,797.19
The Twister Group (US & Canada)
0.00% (~ $$v)
New
$1,804.12
New | $1,766.08Free Delivery | Store |
New | $1,790.71Free Delivery | Store |
Full Compass Systems | $1,797.19Free Delivery | Store |
The Twister Group (US & Canada) | $1,804.12$111.26 Delivery | Store |
The Twister Group | $1,804.12$111.26 Delivery | Store |
Currently Unavailable
Product Description
Bogen's M-Class series is designed for reliability, flexibility, and power, and features three modes of operation: Stereo, 70V Mono, or Dual Mono; and 2 modular input bays for a variety of prioritized input types. Additional features include Bogen's patented Back-Slope circuitry for regulating the proper amount of AC energy from the amplifier's power toroid, an energy-saving Sleep Mode, and support for up to two input modules with up to two priority settings with the ability to add other modules as needed.Bogen M600 Features:3 modes of operation to choose from - Stereo, Dual Mono, or 70V MonoLow noise, low distortion, and high slew rateFlexible modular input capability (2 module capacity)Professional, dual-channel (balanced or unbalanced), high-impedance input module with gain selection included3 selectable low-frequency, roll-off choices2x1 mixer function when in mono modesInsert connections for outboard equipment (in mono modes)Post- and Pre-EQ Output Feeds (summed mono out in stereo mode)DC, overload, short circuit, and thermal protection circuits Clip limiting circuits for speaker protectionPower-saving Sleep Mode for intermittent use applicationsStatus, Signal, and Clip/Limit indicatorsBack-Slope AC voltage stabilization for dependable performance over varying AC line voltagesHeavy-gauge steel chassis with cast aluminum front panelRecessed volume control knobs with snap-on protective coverMounts in 2 rack spaces (3-1/2") directly stackable without need for extra space above or below2 independent, continuously variable, cooling fans for dependable and quiet operationEasily removable front fan grilles with filtersStable into 2-ohm loadsBogen M600 Specifications:Power Output:70V Mono: 1200W @ 4 ohms4-ohm: 600W per channel8-ohm: 400W per channelInput Sensitivity: 1.161V for 600W @ 4 ohmsS/N Ratio (20K BW): 109 dB ref. 8 ohms, F.P.Class of Operation: HProduct Weight: 46 lbsConnectors:Power: 20A line cordInput: 2 new Bogen std. 12-pin connector modules/RCA inputOutput: 5-pin "touch-proof" Barrier Strip, RCAPre- & Post-EQ OutputPower Bandwidth: 20-40kHz .5% THDTHD @ 1 kHz rated power: less than .02%Load Impedance: 4-8 ohms, 70VMinimum Load Impedance (Stereo): 3.2 ohmsFrequency Response @ 1 watt: 20-20kHz +/-0.25dBOutput Regulation:1kHz Direct: 0.5dB @ 8 ohms1kHz Bridged: 1.5dB @70VInputs (Plug-in modules): Electronically balanced, high-impedance module standard, other modular input types availableAC Input Voltage Range: 95-130V AC, 60HzMaximum AC Current: 20AIndicators: Status (On/Protect/Sleep), Clip/Limit, SignalTemperature Range: 15 to 105 degrees FCooling: Forced Air Variable Speed FanDimensions (WxHxD): 17" x 3 1/2" x 16"Protection: RF, DC, Low-frequency, Thermal, Low-Impedance, Circuit-Breaker, Short CircuitSpecial Features: Sleep Mode, Back-Slode regulation, Stereo, Dual Mono,70V Mono Operation, Toroidal Power Transformer Bogen M600 2-Channel Power Amplifier, 600W at 4 Ohms.
Product Specifications
General | |
|---|---|
Brand | Bogen Communications |
Material | mode |
Size | 4 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.