Bogen Communications Bogen Hta125a 125-Watt Rack Mounting Amplifier
The Bogen HTA Professional Series Power Amplifiers are high-performance units employing state of- the-art Power MOSFET technology. The characteristics of Power MOSFETS make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They afford higher efficiency,reduced heat,simpler overall design, reduced size and weight.The Model HTA125A supplies 125 watts (rms continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000Hz.An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50,000 ohms) unbalanced; low-impedance (500/600 ohms, balanced or unbalanced) with optional accessory transformer Model TL600. Line-bridging can be achieved with an optional transformer Model TL100. Residual hum and noise is at least 90dB below rated output and the output regulation is better than 2dB from no load to full load.The HTA125A can drive a variety of load impedances: outputs include 4 ohms, 8 ohms, 25 VCT and 70.7 volts. It is capable of safely driving any recommended load continuously. The HTA125A is thermally protected to prevent damage due to excessively high temperatures;however,the amplifier will deliver the full rated power output continuously, even at +55ºC (+131ºF).Additional failure-preventive devices include electronic overload limiting, short circuit protection, and a slo-blo fuse.Electronic shutdown circuitry is automatically activated if an overload or short circuit occurs and a front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power on/off switch, located on the front panel, illuminates when the power is on.The rear panel contains an input level control, input and output connections, the ac line fuse,and an auxiliary receptacle.A low cut filter switch is located internally.Features125 WattsDesigned for continuous operation at rated power, up to 120°F; convection-cooledThermal protection and automatic electronic overload protectionHi-Z unbalanced and Lo-Z balanced or unbalanced input w/ accessorytransformer (TL600)4-ohm, 8-ohm, 25V, & 70V outputsSpecificationsFrequency Response: ±1dB,20 to 20,000Hz at full rated outputInput Sensitivity: Hi-Z,500mV;Lo-Z balanced,with optional transformer,100mVHum and Noise: 90dB below rated outputOutput Loads: 4 ohms,8 ohms,25VCT (5 ohms),70.7V (40 ohms)Output Regulation: Better than 2dB from no load to full loadInput Impedances:Hi-Z,50,000 ohmsunbalanced; Lo-Z,600 ohms, balanced or unbalanced1:1bridging with optional plug-in transformersLow-Cut Filter: -10dB @ 100HzControls & Indicators:Front Panel —Illuminated on/off power switch and overload shutdown LEDRear Panel — Input level control, Slo-Blo fuseInternal — Low-Cut filter switchPower Requirements: 120VAC, 60Hz, 260 watts @ Full Rated Output (Idle 45W)Overload Protection:Electronic overload protectionElectrical — 4A Slo-BloFuseThermal — 105ºC - 220ºF ThermostatOperating Temperature Range: -20ºC (-4ºF) to +55ºC (+131ºF) at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*,300 watts maximumDimensions (W x H x D, w/o feet): 19” x 11” x 5-1/4” (48.3 x 27.9 x 13.3cm)Front Panel Dimensions (W x H): 19” x 5-1/4” (48.3 x 13.3 cm)Finish: BlackWeight: 36 lbs. (16.3 kg)Rated Output Power: 125 watts rmsTotal Harmonic Distortion: Less than 0.5%, 20 to 20,000Hz at full rated outputAccessories:600-ohm line-matching transformer (Model TL600)1:1 line-matching transformer (ModelTL100) Bogen HTA125A 125W Power Amplifier.
Price now:
From
$741.54
To
$907.31
Price History:
Details:Bogen Communications Bogen Hta125a 125-Watt Rack Mounting Amplifier
The Bogen HTA Professional Series Power Amplifiers are high-performance units employing state of- the-art Power MOSFET technology. The characteristics of Power MOSFETS make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They afford higher efficiency,reduced heat,simpler overall design, reduced size and weight.The Model HTA125A supplies 125 watts (rms continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000Hz.An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50,000 ohms) unbalanced; low-impedance (500/600 ohms, balanced or unbalanced) with optional accessory transformer Model TL600. Line-bridging can be achieved with an optional transformer Model TL100. Residual hum and noise is at least 90dB below rated output and the output regulation is better than 2dB from no load to full load.The HTA125A can drive a variety of load impedances: outputs include 4 ohms, 8 ohms, 25 VCT and 70.7 volts. It is capable of safely driving any recommended load continuously. The HTA125A is thermally protected to prevent damage due to excessively high temperatures;however,the amplifier will deliver the full rated power output continuously, even at +55ºC (+131ºF).Additional failure-preventive devices include electronic overload limiting, short circuit protection, and a slo-blo fuse.Electronic shutdown circuitry is automatically activated if an overload or short circuit occurs and a front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power on/off switch, located on the front panel, illuminates when the power is on.The rear panel contains an input level control, input and output connections, the ac line fuse,and an auxiliary receptacle.A low cut filter switch is located internally.Features125 WattsDesigned for continuous operation at rated power, up to 120°F; convection-cooledThermal protection and automatic electronic overload protectionHi-Z unbalanced and Lo-Z balanced or unbalanced input w/ accessorytransformer (TL600)4-ohm, 8-ohm, 25V, & 70V outputsSpecificationsFrequency Response: ±1dB,20 to 20,000Hz at full rated outputInput Sensitivity: Hi-Z,500mV;Lo-Z balanced,with optional transformer,100mVHum and Noise: 90dB below rated outputOutput Loads: 4 ohms,8 ohms,25VCT (5 ohms),70.7V (40 ohms)Output Regulation: Better than 2dB from no load to full loadInput Impedances:Hi-Z,50,000 ohmsunbalanced; Lo-Z,600 ohms, balanced or unbalanced1:1bridging with optional plug-in transformersLow-Cut Filter: -10dB @ 100HzControls & Indicators:Front Panel —Illuminated on/off power switch and overload shutdown LEDRear Panel — Input level control, Slo-Blo fuseInternal — Low-Cut filter switchPower Requirements: 120VAC, 60Hz, 260 watts @ Full Rated Output (Idle 45W)Overload Protection:Electronic overload protectionElectrical — 4A Slo-BloFuseThermal — 105ºC - 220ºF ThermostatOperating Temperature Range: -20ºC (-4ºF) to +55ºC (+131ºF) at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*,300 watts maximumDimensions (W x H x D, w/o feet): 19” x 11” x 5-1/4” (48.3 x 27.9 x 13.3cm)Front Panel Dimensions (W x H): 19” x 5-1/4” (48.3 x 13.3 cm)Finish: BlackWeight: 36 lbs. (16.3 kg)Rated Output Power: 125 watts rmsTotal Harmonic Distortion: Less than 0.5%, 20 to 20,000Hz at full rated outputAccessories:600-ohm line-matching transformer (Model TL600)1:1 line-matching transformer (ModelTL100) Bogen HTA125A 125W Power Amplifier.
Price now:
From
$741.54
To
$907.31
This site contains affiliate links for which we may be compensated.
Newegg Business
0.02% (+ $0.16)
New
$741.54
Newegg Business
0.00% (~ $$v)
New
$887.97
Newegg
0.70% (+ $6.33)
New
$907.31
New | $741.54Free Delivery | Store |
The Twister Group (US & Canada) | $776.12$73.93 Delivery | Store |
The Twister Group | $776.12$73.93 Delivery | Store |
Reverb (US) | $798.73Free Delivery | Store |
Full Compass Systems | $798.73Free Delivery | Store |
New | $887.97Free Delivery | Store |
New | $907.31Free Delivery | Store |
Currently Unavailable
Product Description
The Bogen HTA Professional Series Power Amplifiers are high-performance units employing state of- the-art Power MOSFET technology. The characteristics of Power MOSFETS make them ideally suited to power amplifier design, providing far superior performance and reliability compared to other types of transistors. They afford higher efficiency,reduced heat,simpler overall design, reduced size and weight.The Model HTA125A supplies 125 watts (rms continuous output) at less than 0.5% total harmonic distortion from 20 to 20,000Hz.An input signal of only 500mV is required for full rated output. The input impedances are: high-impedance (50,000 ohms) unbalanced; low-impedance (500/600 ohms, balanced or unbalanced) with optional accessory transformer Model TL600. Line-bridging can be achieved with an optional transformer Model TL100. Residual hum and noise is at least 90dB below rated output and the output regulation is better than 2dB from no load to full load.The HTA125A can drive a variety of load impedances: outputs include 4 ohms, 8 ohms, 25 VCT and 70.7 volts. It is capable of safely driving any recommended load continuously. The HTA125A is thermally protected to prevent damage due to excessively high temperatures;however,the amplifier will deliver the full rated power output continuously, even at +55ºC (+131ºF).Additional failure-preventive devices include electronic overload limiting, short circuit protection, and a slo-blo fuse.Electronic shutdown circuitry is automatically activated if an overload or short circuit occurs and a front panel overload shutdown LED illuminates. Once the cause has been rectified, the unit automatically resets. The power on/off switch, located on the front panel, illuminates when the power is on.The rear panel contains an input level control, input and output connections, the ac line fuse,and an auxiliary receptacle.A low cut filter switch is located internally.Features125 WattsDesigned for continuous operation at rated power, up to 120°F; convection-cooledThermal protection and automatic electronic overload protectionHi-Z unbalanced and Lo-Z balanced or unbalanced input w/ accessorytransformer (TL600)4-ohm, 8-ohm, 25V, & 70V outputsSpecificationsFrequency Response: ±1dB,20 to 20,000Hz at full rated outputInput Sensitivity: Hi-Z,500mV;Lo-Z balanced,with optional transformer,100mVHum and Noise: 90dB below rated outputOutput Loads: 4 ohms,8 ohms,25VCT (5 ohms),70.7V (40 ohms)Output Regulation: Better than 2dB from no load to full loadInput Impedances:Hi-Z,50,000 ohmsunbalanced; Lo-Z,600 ohms, balanced or unbalanced1:1bridging with optional plug-in transformersLow-Cut Filter: -10dB @ 100HzControls & Indicators:Front Panel —Illuminated on/off power switch and overload shutdown LEDRear Panel — Input level control, Slo-Blo fuseInternal — Low-Cut filter switchPower Requirements: 120VAC, 60Hz, 260 watts @ Full Rated Output (Idle 45W)Overload Protection:Electronic overload protectionElectrical — 4A Slo-BloFuseThermal — 105ºC - 220ºF ThermostatOperating Temperature Range: -20ºC (-4ºF) to +55ºC (+131ºF) at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*,300 watts maximumDimensions (W x H x D, w/o feet): 19” x 11” x 5-1/4” (48.3 x 27.9 x 13.3cm)Front Panel Dimensions (W x H): 19” x 5-1/4” (48.3 x 13.3 cm)Finish: BlackWeight: 36 lbs. (16.3 kg)Rated Output Power: 125 watts rmsTotal Harmonic Distortion: Less than 0.5%, 20 to 20,000Hz at full rated outputAccessories:600-ohm line-matching transformer (Model TL600)1:1 line-matching transformer (ModelTL100) Bogen HTA125A 125W Power Amplifier.
Product Specifications
General | |
|---|---|
Size | 4 |
Brand | Bogen Communications |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.