Bogen Bpa60 60W Power Amplifier
The Bogen BPA60 solid-state power amplifier has been designed to fulfill the power amplification requirements of professional and commercial sound systems. The Model BPA60 supplies 60 watts RMS output. Total harmonic distortion is less than 2% at rated output from 50Hz to 15kHz.Input impedances for the BPA60 are: high-impedance (50k-ohms) unbalanced; and low-impedance (500/600 ohms, balanced or unbalanced) with accessory transformer Model TL600. Line-bridging may be achieved with accessory transformer Model TL100. Hum and noise are at least 85dB below rated output.The BPA60 amplifier may be driven from an amplifier that provides a 25- or 70-volt output (with WMT1A accessory). Output impedances for the BPA60 are: 8-ohm/25V, 16-ohm, 25VCT and 70V. Output regulation is better than 2dB from no load to full load.The BPA60 amplifier is thermally protected to prevent damage due to excessive temperatures. Additional protection is provided by transient protection diodes and an electrical circuit breaker.An illuminated on/off power switch is located on the front panel. An input level control, circuit breaker reset, lo-cut filter switch, and auxiliary receptacle are located on the rear panel. A rack panel kit (RPK53) is available for mounting the amplifier in a 19" equipment rack.Bogen BPA60 Features:60 watts rated powerDistortion less than 2% THDTransient protection diodesFrequency response -2dB form 20Hz to 20kHzMultiple output voltages/impedances availableResettable circuit breaker; thermally protectedBogen BPA60 Specifications:Rated Output Power: 60 watts RMSTotal Harmonic Distortion: Less than 2% from 50Hz to 15kHzFrequency Response: -2dB, 20Hz to 20kHzInput Sensitivity: High-impedance, 300mV; low-impedance balanced, with optional transformer, 75mVHum and Noise: 85dB below rated outputOutput Loads: 8-ohm/25V, 16-ohms, 25VCT, 70VOutput Regulation: Better than 2dB from no load to full loadInput Impedances: High-impedance, 50k-ohms unbalanced; low-impedance, 600ohms, balanced or 1:1 bridging (with accessory transformer)Lo-cut Filter: -10dB at 100Hz (switch-selectable)Controls and Indicators:Front Panel - Illuminated on/off power switchRear Panel - Input level control, circuit breaker reset, lo-cut filter switchPower Consumption: 120V AC, 60Hz, 180W at full rated outputThermal Emissions (full power): 204.9 BTU/hr.Overload Protection: Transient protection diodes, electrical circuit breaker, 221°F thermostatOperating Temperature Range: -4°F to +131°F at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*, 300W maximum, 2.5A (fused) (*This receptacle will be grounded only if the power amplifier has been grounded properly)Dimensions (W x H x D): 15 1/4" x 3 1/2" x 8"Finish: BlackWeight: 17 lbsAccessories:Model TL600, 600-ohm line-matching transformerMOdelTL100, 1:1 ratio transformerModel RPK53 rack panel brackets Bogen BPA60 60W Power Amplifier.
Price now:
From
$494.95
To
$700.00
Price History:
Details:Bogen Bpa60 60W Power Amplifier
The Bogen BPA60 solid-state power amplifier has been designed to fulfill the power amplification requirements of professional and commercial sound systems. The Model BPA60 supplies 60 watts RMS output. Total harmonic distortion is less than 2% at rated output from 50Hz to 15kHz.Input impedances for the BPA60 are: high-impedance (50k-ohms) unbalanced; and low-impedance (500/600 ohms, balanced or unbalanced) with accessory transformer Model TL600. Line-bridging may be achieved with accessory transformer Model TL100. Hum and noise are at least 85dB below rated output.The BPA60 amplifier may be driven from an amplifier that provides a 25- or 70-volt output (with WMT1A accessory). Output impedances for the BPA60 are: 8-ohm/25V, 16-ohm, 25VCT and 70V. Output regulation is better than 2dB from no load to full load.The BPA60 amplifier is thermally protected to prevent damage due to excessive temperatures. Additional protection is provided by transient protection diodes and an electrical circuit breaker.An illuminated on/off power switch is located on the front panel. An input level control, circuit breaker reset, lo-cut filter switch, and auxiliary receptacle are located on the rear panel. A rack panel kit (RPK53) is available for mounting the amplifier in a 19" equipment rack.Bogen BPA60 Features:60 watts rated powerDistortion less than 2% THDTransient protection diodesFrequency response -2dB form 20Hz to 20kHzMultiple output voltages/impedances availableResettable circuit breaker; thermally protectedBogen BPA60 Specifications:Rated Output Power: 60 watts RMSTotal Harmonic Distortion: Less than 2% from 50Hz to 15kHzFrequency Response: -2dB, 20Hz to 20kHzInput Sensitivity: High-impedance, 300mV; low-impedance balanced, with optional transformer, 75mVHum and Noise: 85dB below rated outputOutput Loads: 8-ohm/25V, 16-ohms, 25VCT, 70VOutput Regulation: Better than 2dB from no load to full loadInput Impedances: High-impedance, 50k-ohms unbalanced; low-impedance, 600ohms, balanced or 1:1 bridging (with accessory transformer)Lo-cut Filter: -10dB at 100Hz (switch-selectable)Controls and Indicators:Front Panel - Illuminated on/off power switchRear Panel - Input level control, circuit breaker reset, lo-cut filter switchPower Consumption: 120V AC, 60Hz, 180W at full rated outputThermal Emissions (full power): 204.9 BTU/hr.Overload Protection: Transient protection diodes, electrical circuit breaker, 221°F thermostatOperating Temperature Range: -4°F to +131°F at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*, 300W maximum, 2.5A (fused) (*This receptacle will be grounded only if the power amplifier has been grounded properly)Dimensions (W x H x D): 15 1/4" x 3 1/2" x 8"Finish: BlackWeight: 17 lbsAccessories:Model TL600, 600-ohm line-matching transformerMOdelTL100, 1:1 ratio transformerModel RPK53 rack panel brackets Bogen BPA60 60W Power Amplifier.
Price now:
From
$494.95
To
$700.00
This site contains affiliate links for which we may be compensated.
Reverb (US) | $494.95Free Delivery | Store |
Full Compass Systems | $494.95Free Delivery | Store |
Prime Buy | $700.00Free Delivery | Store |
Product Description
The Bogen BPA60 solid-state power amplifier has been designed to fulfill the power amplification requirements of professional and commercial sound systems. The Model BPA60 supplies 60 watts RMS output. Total harmonic distortion is less than 2% at rated output from 50Hz to 15kHz.Input impedances for the BPA60 are: high-impedance (50k-ohms) unbalanced; and low-impedance (500/600 ohms, balanced or unbalanced) with accessory transformer Model TL600. Line-bridging may be achieved with accessory transformer Model TL100. Hum and noise are at least 85dB below rated output.The BPA60 amplifier may be driven from an amplifier that provides a 25- or 70-volt output (with WMT1A accessory). Output impedances for the BPA60 are: 8-ohm/25V, 16-ohm, 25VCT and 70V. Output regulation is better than 2dB from no load to full load.The BPA60 amplifier is thermally protected to prevent damage due to excessive temperatures. Additional protection is provided by transient protection diodes and an electrical circuit breaker.An illuminated on/off power switch is located on the front panel. An input level control, circuit breaker reset, lo-cut filter switch, and auxiliary receptacle are located on the rear panel. A rack panel kit (RPK53) is available for mounting the amplifier in a 19" equipment rack.Bogen BPA60 Features:60 watts rated powerDistortion less than 2% THDTransient protection diodesFrequency response -2dB form 20Hz to 20kHzMultiple output voltages/impedances availableResettable circuit breaker; thermally protectedBogen BPA60 Specifications:Rated Output Power: 60 watts RMSTotal Harmonic Distortion: Less than 2% from 50Hz to 15kHzFrequency Response: -2dB, 20Hz to 20kHzInput Sensitivity: High-impedance, 300mV; low-impedance balanced, with optional transformer, 75mVHum and Noise: 85dB below rated outputOutput Loads: 8-ohm/25V, 16-ohms, 25VCT, 70VOutput Regulation: Better than 2dB from no load to full loadInput Impedances: High-impedance, 50k-ohms unbalanced; low-impedance, 600ohms, balanced or 1:1 bridging (with accessory transformer)Lo-cut Filter: -10dB at 100Hz (switch-selectable)Controls and Indicators:Front Panel - Illuminated on/off power switchRear Panel - Input level control, circuit breaker reset, lo-cut filter switchPower Consumption: 120V AC, 60Hz, 180W at full rated outputThermal Emissions (full power): 204.9 BTU/hr.Overload Protection: Transient protection diodes, electrical circuit breaker, 221°F thermostatOperating Temperature Range: -4°F to +131°F at rated outputAuxiliary Receptacle (not switched): Three-wire grounded*, 300W maximum, 2.5A (fused) (*This receptacle will be grounded only if the power amplifier has been grounded properly)Dimensions (W x H x D): 15 1/4" x 3 1/2" x 8"Finish: BlackWeight: 17 lbsAccessories:Model TL600, 600-ohm line-matching transformerMOdelTL100, 1:1 ratio transformerModel RPK53 rack panel brackets Bogen BPA60 60W Power Amplifier.
Product Specifications
General | |
|---|---|
Brand | Bogen |
Size | 2 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.