Pv-4040Ns Pvc (Pv-4040Ns) Commercial Membrane Housing 4.0" X 40" Pvc; U-Pin
The unique circuitry of the 750 Series II Conductivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by ""field proven"" electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L Monitor/controllers feature a highly refined and precise TC circuit. This feature perfectly matches the water temperature coefficient as it changes. All models corrected to 25°C. The TC may be disabled to conform with USP requirements.Built-in electronic calibration allows for fast quality checks without standard solutions. (Note: for maximum system accuracy standard solutions are recommended). A push-to-test button makes setpoint checks easy, while the internal alarm set discourages unauthorized adjustments.Standard on all controller models is a heavy-duty 10 amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above or below setpoint readings. All 750 Series II models feature an IP65/ NEMA 4X water-resistant and corrosion-proof rated enclosure. Compact in size at 152 x 122 mm/6 x 4.8 in., they are suitable for panel, bench or surface mounting.Additional options include a 3 Sensor Input Switch and/or a 3 Range Switch and a Remote Alarm model RA.FeaturesConductivity ranges: 0-50000 Microsiemens, 0-50000 ppm, 0-200 mS, 0-200 pptAutomatic temperature compensation to 25°CIsolated 0-10 VDC Recorder Output standardIP65/NEMA 4X water-resistant and corrosion-proof enclosureBuilt-in electronic calibrationSingle set point/alarm standardAdjustable setpoint hysteresisSolid State 24 VDC Output10 amp relay operates on choice of increasing or decreasing readingLEDs show ""above/below"" Alarm/control statusPush-to-test set point checkInternal set point discourages unauthorized adjustmentSelectable 115/230 VACReliable, easily installed sensorsBenefitsAffordableEase of OperationLow MaintenanceEnsures Product Quality750 Series II Product Applications:Reverse OsmosisProcess ControlSeawater DesalinationWaste TreatmentFood ProcessingPlatingPower PlantsLaboratoriesPrintingAquacultureAgricultureEnvironmental StudiesMedicalBoilers (250 psi at 205°C)Cooling Towers750 Series II Sensor Specifications:Temperature Compensation: Integral thermistors provide automatic TC to 25°C between 0-100°C/32-212°F.Pressure /Temperature Limits: CS51: 100 psi / 690 kPa at 100°C/212°F. 250 psig at 205°C, Models CS40 and CS41 sensors available on special order.Bushing: Modular Polypropylene threaded 3/4"" NPT. 1/2"" PVDF or 316 stainless steel fittings available as option.Cable: Shielded 10 ft./3 meters standard 25 and 100 ft./ 8 and 30 meter lengths available. 100 ft./30 meter is maximum recommended.Dimensions: CS51: Metal portion 30 L x 13 Dia. mm/ 1.2 L x .5 Dia. in.Sensors - CS51LC, CS51 and CS52These reliable sensors feature an integral temperature sensor to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene bushing is modular for easy inexpensive replacement. Several alternatives for the metal portion of the sensor are available, depending on the demands of the application.CS51LC sensors (0.1 constant) are used for 5 and below.CS51 sensors (1.0 constant) are used between 0-10 and 0-20,000.CS52 sensors (10.0 constant) are used above 20,000.OEM = Main circuit board with meter or Liquid Crystal Display (LCD) and 12 in./305 mm Harness only. Meter comes with proper scale (Dial) decided by range selected and panel insert. LCD is Bezel style with mounting hardware for ease of panel mounting. For custom installations by customers not requiring the enclosure.For more information, please see Data Sheet
Price now:
From
$279.95
To
$808.90
Price History:
Details:Pv-4040Ns Pvc (Pv-4040Ns) Commercial Membrane Housing 4.0" X 40" Pvc; U-Pin
The unique circuitry of the 750 Series II Conductivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by ""field proven"" electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L Monitor/controllers feature a highly refined and precise TC circuit. This feature perfectly matches the water temperature coefficient as it changes. All models corrected to 25°C. The TC may be disabled to conform with USP requirements.Built-in electronic calibration allows for fast quality checks without standard solutions. (Note: for maximum system accuracy standard solutions are recommended). A push-to-test button makes setpoint checks easy, while the internal alarm set discourages unauthorized adjustments.Standard on all controller models is a heavy-duty 10 amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above or below setpoint readings. All 750 Series II models feature an IP65/ NEMA 4X water-resistant and corrosion-proof rated enclosure. Compact in size at 152 x 122 mm/6 x 4.8 in., they are suitable for panel, bench or surface mounting.Additional options include a 3 Sensor Input Switch and/or a 3 Range Switch and a Remote Alarm model RA.FeaturesConductivity ranges: 0-50000 Microsiemens, 0-50000 ppm, 0-200 mS, 0-200 pptAutomatic temperature compensation to 25°CIsolated 0-10 VDC Recorder Output standardIP65/NEMA 4X water-resistant and corrosion-proof enclosureBuilt-in electronic calibrationSingle set point/alarm standardAdjustable setpoint hysteresisSolid State 24 VDC Output10 amp relay operates on choice of increasing or decreasing readingLEDs show ""above/below"" Alarm/control statusPush-to-test set point checkInternal set point discourages unauthorized adjustmentSelectable 115/230 VACReliable, easily installed sensorsBenefitsAffordableEase of OperationLow MaintenanceEnsures Product Quality750 Series II Product Applications:Reverse OsmosisProcess ControlSeawater DesalinationWaste TreatmentFood ProcessingPlatingPower PlantsLaboratoriesPrintingAquacultureAgricultureEnvironmental StudiesMedicalBoilers (250 psi at 205°C)Cooling Towers750 Series II Sensor Specifications:Temperature Compensation: Integral thermistors provide automatic TC to 25°C between 0-100°C/32-212°F.Pressure /Temperature Limits: CS51: 100 psi / 690 kPa at 100°C/212°F. 250 psig at 205°C, Models CS40 and CS41 sensors available on special order.Bushing: Modular Polypropylene threaded 3/4"" NPT. 1/2"" PVDF or 316 stainless steel fittings available as option.Cable: Shielded 10 ft./3 meters standard 25 and 100 ft./ 8 and 30 meter lengths available. 100 ft./30 meter is maximum recommended.Dimensions: CS51: Metal portion 30 L x 13 Dia. mm/ 1.2 L x .5 Dia. in.Sensors - CS51LC, CS51 and CS52These reliable sensors feature an integral temperature sensor to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene bushing is modular for easy inexpensive replacement. Several alternatives for the metal portion of the sensor are available, depending on the demands of the application.CS51LC sensors (0.1 constant) are used for 5 and below.CS51 sensors (1.0 constant) are used between 0-10 and 0-20,000.CS52 sensors (10.0 constant) are used above 20,000.OEM = Main circuit board with meter or Liquid Crystal Display (LCD) and 12 in./305 mm Harness only. Meter comes with proper scale (Dial) decided by range selected and panel insert. LCD is Bezel style with mounting hardware for ease of panel mounting. For custom installations by customers not requiring the enclosure.For more information, please see Data Sheet
Price now:
From
$279.95
To
$808.90
This site contains affiliate links for which we may be compensated.
IsoPure Water
0.00% (~ $$v)
New
$279.95
Selectum LLC
0.00% (~ $$v)
New
$808.90
IsoPure Water | $279.95Free Delivery | Store |
Selectum LLC | $808.90Free Delivery | Store |
Product Description
The unique circuitry of the 750 Series II Conductivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by ""field proven"" electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L Monitor/controllers feature a highly refined and precise TC circuit. This feature perfectly matches the water temperature coefficient as it changes. All models corrected to 25°C. The TC may be disabled to conform with USP requirements.Built-in electronic calibration allows for fast quality checks without standard solutions. (Note: for maximum system accuracy standard solutions are recommended). A push-to-test button makes setpoint checks easy, while the internal alarm set discourages unauthorized adjustments.Standard on all controller models is a heavy-duty 10 amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above or below setpoint readings. All 750 Series II models feature an IP65/ NEMA 4X water-resistant and corrosion-proof rated enclosure. Compact in size at 152 x 122 mm/6 x 4.8 in., they are suitable for panel, bench or surface mounting.Additional options include a 3 Sensor Input Switch and/or a 3 Range Switch and a Remote Alarm model RA.FeaturesConductivity ranges: 0-50000 Microsiemens, 0-50000 ppm, 0-200 mS, 0-200 pptAutomatic temperature compensation to 25°CIsolated 0-10 VDC Recorder Output standardIP65/NEMA 4X water-resistant and corrosion-proof enclosureBuilt-in electronic calibrationSingle set point/alarm standardAdjustable setpoint hysteresisSolid State 24 VDC Output10 amp relay operates on choice of increasing or decreasing readingLEDs show ""above/below"" Alarm/control statusPush-to-test set point checkInternal set point discourages unauthorized adjustmentSelectable 115/230 VACReliable, easily installed sensorsBenefitsAffordableEase of OperationLow MaintenanceEnsures Product Quality750 Series II Product Applications:Reverse OsmosisProcess ControlSeawater DesalinationWaste TreatmentFood ProcessingPlatingPower PlantsLaboratoriesPrintingAquacultureAgricultureEnvironmental StudiesMedicalBoilers (250 psi at 205°C)Cooling Towers750 Series II Sensor Specifications:Temperature Compensation: Integral thermistors provide automatic TC to 25°C between 0-100°C/32-212°F.Pressure /Temperature Limits: CS51: 100 psi / 690 kPa at 100°C/212°F. 250 psig at 205°C, Models CS40 and CS41 sensors available on special order.Bushing: Modular Polypropylene threaded 3/4"" NPT. 1/2"" PVDF or 316 stainless steel fittings available as option.Cable: Shielded 10 ft./3 meters standard 25 and 100 ft./ 8 and 30 meter lengths available. 100 ft./30 meter is maximum recommended.Dimensions: CS51: Metal portion 30 L x 13 Dia. mm/ 1.2 L x .5 Dia. in.Sensors - CS51LC, CS51 and CS52These reliable sensors feature an integral temperature sensor to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene bushing is modular for easy inexpensive replacement. Several alternatives for the metal portion of the sensor are available, depending on the demands of the application.CS51LC sensors (0.1 constant) are used for 5 and below.CS51 sensors (1.0 constant) are used between 0-10 and 0-20,000.CS52 sensors (10.0 constant) are used above 20,000.OEM = Main circuit board with meter or Liquid Crystal Display (LCD) and 12 in./305 mm Harness only. Meter comes with proper scale (Dial) decided by range selected and panel insert. LCD is Bezel style with mounting hardware for ease of panel mounting. For custom installations by customers not requiring the enclosure.For more information, please see Data Sheet
Product Specifications
General | |
|---|---|
Material | stainless steel |
Size | 4 |
Brand | PV-4040NS |
Color | green/red |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.