Get your hairspray out and plug your B.C. Rich into the MXR Rockman X100 Analog Tone Processor to get a gnarly blast of ‘80s arena rock tone right from your pedalboard. Reviving the iconic sound of Tom Scholz’s original headphone amp with analog warmth and studio-worthy tone shaping, the MX100 offers those crystalline clean tones, the gritty harmonics soaked in lush modulation, it's a rig-ready solution that'll leave you with More Than A Feeling. Thanks to its four familiar tonal presets, two clean, two dirty, you can go from tight and punchy rhythm to rich, sustaining leads without touching anything but the MODE button. And the onboard compression, fine-tuned to behave differently depending on your mode and input gain, adds polish and presence without choking your dynamics.This pedal isn’t just a tribute, it’s a faithful re-imagining designed for players who want a classic tone without breaking out vintage gear or climbing behind a rack. The MN3007 bucket-brigade chip powers the iconic stereo chorus effect that adds serious width and shimmer, especially when used in stereo mode, where each side pulses just slightly differently for a dynamic, spacious result. With simple controls for input gain and volume, stereo outputs, and the ability to hook up an external footswitch for mode switching, the X100 fits right into modern rigs while staying true to its legacy. MXR MX100 SpecificationsInput Impedance: 700 kΩOutput Impedance: 1.8 kΩCurrent Draw: 120 mABypass: Buffered BypassPower Supply: 9 volts DC MXR MX100 MXR Rockman X100 Preamp Pedal.