Crown Cdi4x600
CDi DriveCore 4600 is a 4-Channel Amplifier with Analog Input and 600W per Output ChannelAn impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown’s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4600 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4600 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesExclusive multi-patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliabilitySupports configuration and control using HiQnet® Audio Architect™Monitoring and control over TCP/IPColor LCD and front panel user interface for amplifier configuration, control, and monitoringProgrammable GPIO (general purpose input/output) control portDigital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAXTM limiters)Support for importing of FIR filter coefficients20 device presets – 1 factory and 19 user96kHz/32-bit floating-point signal processingUniversal power supply with PFC for reduced current draw and industry-leading efficiencyPower saving modesRemote power off – Sleep mode activated via AUX port70Vrms/100Vrms direct driveEach channel independently configurable for low z or high z operationAdvanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overloadSpecificationsChannels: 4Sensitivity (for full rated power at 8 ohms): 0.7V RMSRated Power Output (per channel @ 4 ohms): 600WAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz at 8 ohms): >104dBTHD (full rated power, 20 Hz - 20 kHz): 0.35%Damping Factor (20 Hz to 100 Hz): >1000Frequency Response (8Ω, 20 Hz - 20 kHz) +/-0.25dBCrosstalk (below rated power) 20 Hz to 1 kHz: >80dBInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblancedDimensions (W x H x D): 19 x 3.5 x 12.25 in (48.26 x 8.89 x 31.12 cm) (depth not including 1.3 inch front panel protrusion)Weight: 16.3 lbs (7.39 kg)Power Supply Connector: 15A IEC connector, 100 – 240V Crown CDI DriveCore 4 600 4-Channel Power Amplifier, 600W at 4 Ohms, 70V.
Price now:
From
$3,681.00
To
$4,527.00
Price History:
Details:Crown Cdi4x600
CDi DriveCore 4600 is a 4-Channel Amplifier with Analog Input and 600W per Output ChannelAn impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown’s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4600 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4600 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesExclusive multi-patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliabilitySupports configuration and control using HiQnet® Audio Architect™Monitoring and control over TCP/IPColor LCD and front panel user interface for amplifier configuration, control, and monitoringProgrammable GPIO (general purpose input/output) control portDigital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAXTM limiters)Support for importing of FIR filter coefficients20 device presets – 1 factory and 19 user96kHz/32-bit floating-point signal processingUniversal power supply with PFC for reduced current draw and industry-leading efficiencyPower saving modesRemote power off – Sleep mode activated via AUX port70Vrms/100Vrms direct driveEach channel independently configurable for low z or high z operationAdvanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overloadSpecificationsChannels: 4Sensitivity (for full rated power at 8 ohms): 0.7V RMSRated Power Output (per channel @ 4 ohms): 600WAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz at 8 ohms): >104dBTHD (full rated power, 20 Hz - 20 kHz): 0.35%Damping Factor (20 Hz to 100 Hz): >1000Frequency Response (8Ω, 20 Hz - 20 kHz) +/-0.25dBCrosstalk (below rated power) 20 Hz to 1 kHz: >80dBInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblancedDimensions (W x H x D): 19 x 3.5 x 12.25 in (48.26 x 8.89 x 31.12 cm) (depth not including 1.3 inch front panel protrusion)Weight: 16.3 lbs (7.39 kg)Power Supply Connector: 15A IEC connector, 100 – 240V Crown CDI DriveCore 4 600 4-Channel Power Amplifier, 600W at 4 Ohms, 70V.
Price now:
From
$3,681.00
To
$4,527.00
This site contains affiliate links for which we may be compensated.
Full Compass Systems
6.46% (+ $241.00)
New
$3,970.00
Reverb (US) | $3,681.00Free Delivery | Store |
Reverb (US) | $3,970.00Free Delivery | Store |
Full Compass Systems | $3,970.00Free Delivery | Store |
Reverb (US) | $4,090.00Free Delivery | Store |
Reverb (US) | $4,090.00Free Delivery | Store |
Reverb (US) | $4,090.00Free Delivery | Store |
Reverb (US) | $4,090.00Free Delivery | Store |
Reverb (US) | $4,527.00Free Delivery | Store |
Product Description
CDi DriveCore 4600 is a 4-Channel Amplifier with Analog Input and 600W per Output ChannelAn impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown’s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4600 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4600 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesExclusive multi-patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliabilitySupports configuration and control using HiQnet® Audio Architect™Monitoring and control over TCP/IPColor LCD and front panel user interface for amplifier configuration, control, and monitoringProgrammable GPIO (general purpose input/output) control portDigital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAXTM limiters)Support for importing of FIR filter coefficients20 device presets – 1 factory and 19 user96kHz/32-bit floating-point signal processingUniversal power supply with PFC for reduced current draw and industry-leading efficiencyPower saving modesRemote power off – Sleep mode activated via AUX port70Vrms/100Vrms direct driveEach channel independently configurable for low z or high z operationAdvanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overloadSpecificationsChannels: 4Sensitivity (for full rated power at 8 ohms): 0.7V RMSRated Power Output (per channel @ 4 ohms): 600WAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz at 8 ohms): >104dBTHD (full rated power, 20 Hz - 20 kHz): 0.35%Damping Factor (20 Hz to 100 Hz): >1000Frequency Response (8Ω, 20 Hz - 20 kHz) +/-0.25dBCrosstalk (below rated power) 20 Hz to 1 kHz: >80dBInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblancedDimensions (W x H x D): 19 x 3.5 x 12.25 in (48.26 x 8.89 x 31.12 cm) (depth not including 1.3 inch front panel protrusion)Weight: 16.3 lbs (7.39 kg)Power Supply Connector: 15A IEC connector, 100 – 240V Crown CDI DriveCore 4 600 4-Channel Power Amplifier, 600W at 4 Ohms, 70V.
Product Specifications
General | |
|---|---|
Size | small |
Brand | Crown |
Material | mode |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.