Crown Cdi2x300-U-Us
An impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown’s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 2300 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesDriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.DSP – On-board Digital Signal Processor in each amplifier allows for custom configurationInput RouterInput Delay – Up to 1000msInput Parametric EQ – 8 bandCrossoverOutput Parametric EQ – 8 bandOutput Delay – Up to 100msLevelMAX™ LimiterDirect Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.SpecificationsChannels: 2Sensitivity (for full rated power at 8 ohms): 0.7V RMSRated Power Output (per channel @ 4 ohms): 300WAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms): >104dBTHD (full rated power, 20 Hz - 20 kHz): 0.35%Damping Factor (20 Hz to 100 Hz): >1000Frequency Response (8Ω, 20 Hz - 20 kHz): +/-0.5dBCrosstalk (below rated power) 20 Hz to 1 kHz: >80dBInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblancedDimensions (W x H x D): 19 x 3.5 x 12.25 in (48.26 x 8.89 x 31.12 cm) (depth not including 1.3 inch front panel protrusion)Weight: 14.56 lbs (6.6 kg)Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V~ Crown CDi DriveCore 2 300 2-Channel Power Amplifier, 300W at 4 Ohms, 70V.
Price now:
From
$1,004.00
To
$1,798.00
Price History:
Details:Crown Cdi2x300-U-Us
An impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown’s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 2300 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesDriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.DSP – On-board Digital Signal Processor in each amplifier allows for custom configurationInput RouterInput Delay – Up to 1000msInput Parametric EQ – 8 bandCrossoverOutput Parametric EQ – 8 bandOutput Delay – Up to 100msLevelMAX™ LimiterDirect Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.SpecificationsChannels: 2Sensitivity (for full rated power at 8 ohms): 0.7V RMSRated Power Output (per channel @ 4 ohms): 300WAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms): >104dBTHD (full rated power, 20 Hz - 20 kHz): 0.35%Damping Factor (20 Hz to 100 Hz): >1000Frequency Response (8Ω, 20 Hz - 20 kHz): +/-0.5dBCrosstalk (below rated power) 20 Hz to 1 kHz: >80dBInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblancedDimensions (W x H x D): 19 x 3.5 x 12.25 in (48.26 x 8.89 x 31.12 cm) (depth not including 1.3 inch front panel protrusion)Weight: 14.56 lbs (6.6 kg)Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V~ Crown CDi DriveCore 2 300 2-Channel Power Amplifier, 300W at 4 Ohms, 70V.
Price now:
From
$1,004.00
To
$1,798.00
This site contains affiliate links for which we may be compensated.
Full Compass Systems
11.22% (+ $176.00)
New
$1,745.00
Prime Buy | $1,004.00Free Delivery | Store |
Full Compass Systems | $1,745.00Free Delivery | Store |
Reverb (US) | $1,798.00Free Delivery | Store |
Reverb (US) | $1,798.00Free Delivery | Store |
Reverb (US) | $1,798.00Free Delivery | Store |
Reverb (US) | $1,798.00Free Delivery | Store |
Product Description
An impressive mix of high performance, rich features, and competitive cost.The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown’s flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 2300 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.FeaturesDriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.DSP – On-board Digital Signal Processor in each amplifier allows for custom configurationInput RouterInput Delay – Up to 1000msInput Parametric EQ – 8 bandCrossoverOutput Parametric EQ – 8 bandOutput Delay – Up to 100msLevelMAX™ LimiterDirect Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.SpecificationsChannels: 2Sensitivity (for full rated power at 8 ohms): 0.7V RMSRated Power Output (per channel @ 4 ohms): 300WAnalog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms): >104dBTHD (full rated power, 20 Hz - 20 kHz): 0.35%Damping Factor (20 Hz to 100 Hz): >1000Frequency Response (8Ω, 20 Hz - 20 kHz): +/-0.5dBCrosstalk (below rated power) 20 Hz to 1 kHz: >80dBInput Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unblancedDimensions (W x H x D): 19 x 3.5 x 12.25 in (48.26 x 8.89 x 31.12 cm) (depth not including 1.3 inch front panel protrusion)Weight: 14.56 lbs (6.6 kg)Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V~ Crown CDi DriveCore 2 300 2-Channel Power Amplifier, 300W at 4 Ohms, 70V.
Product Specifications
General | |
|---|---|
Size | 8 |
Brand | Crown |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.