Behringer Light Ep2000 2-Channel Power Amplifier, 750W At 4 Ohm
The Behringer EUROPOWER EP2000 stereo power amplifier features excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With a maximum of 2000 Watts (Bridge Mono Mode) the EP2000 amplifier is perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.The über-simple front panel controls of this amp gives you all of your sound’s vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. Since this all happens in just a few thousandths of a second, it’s the ideal way to avoid audible clipping distortion.Rickety stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. The EP2000 features a defeatable Low Cut Filter that chops off unwanted frequencies below 50 Hz or 30 Hz (depending on your PA system’s capabilities). The same panel contains the switches that puts this amp to work in either Stereo or Bridge (mono) mode. The EP2000 can be linked to additional power amps by switching into Parallel mode.There are plenty of awesome features on the outside of the EP2000, but there’s also a team of cool components on the inside helping it work its magic. It comes loaded with famously reliable Toshiba/Fairchild power transistors, as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers.The EP2000 has both XLR and 1/4" TRS Inputs, plus Speakon-compatible Outputs and 5-way binding posts. Whether you’re dealing with bare wire or boutique audiophile cabling, the EP2000 is right at home.The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps this amp working at cooler temperatures, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rack-mount chassis helps this workhorse stand up to all the rigors of the road.Features2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)ATR (Accelerated Transient Response) technology for ultimate punch and claritySwitchable limiters offer maximum output level with reliable overload protectionDetented gain controls for precise setting and matching of sensitivityPrecise Power, Signal and Clip LEDs to monitor performanceXLR and 1/4" TRS input connectors for compatibility with any sourceProfessional speaker connectors and "touch-proof" binding posts support most speaker wiring systemsSelectable low-frequency filters remove damaging infra-sound frequenciesIndependent DC and thermal overload protection on each channel automatically protects amplifier and speakersHigh-current toroidal transformer for ultra-high transient response and absolute reliability"Back-to-front" ventilation system including air filter for reliable operation"Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassisHigh-quality components and exceptionally rugged construction ensure long lifeConceived and designed by Behringer GermanySpecificationsDistortion:300 @ 8 ohmsNoise, unweighted, 20Hz-20kHz: -100dBVoltage Gain: 40X (32dB); 50X (34dB)Input Sensitivity, VRMS (@ 8 ohms): 1.15V (+3.4dBu)Input Impedance: 10k ohms unbalanced, 20k ohm balancedControls:Front: Power switch, gain control (channels 1 and 2)Rear: DIP switches(10x)Input Connectors: Balanced XLR and 1/4" TRS connectorsOutput Connectors: Touch-proof binding posts and professional speaker (Speakon) connectorsCooling: Continuously variable speed fan,back-to-front air flowAmplifier Protection: Full short circuit, open circuit, thermal and HF protection; Stable into reactive or mismatched loadsLoad Protection: Turn-on/off muting AC couplingOutput Circuit Type: Class H complementary linear outputPower Supply:Mains Voltage/Breaker: 220-230V~, 50/60Hz8APower Consumption: 2600WMains Connector: Standard IEC receptacleOutput Power:RMS @ 1% THD (Sine Wave), Both Channels ... Behringer EP2000 2-Channel Power Amplifier, 750W at 4 Ohm.
Price now:
From
$419.00
To
$439.99
Price History:
Details:Behringer Light Ep2000 2-Channel Power Amplifier, 750W At 4 Ohm
The Behringer EUROPOWER EP2000 stereo power amplifier features excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With a maximum of 2000 Watts (Bridge Mono Mode) the EP2000 amplifier is perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.The über-simple front panel controls of this amp gives you all of your sound’s vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. Since this all happens in just a few thousandths of a second, it’s the ideal way to avoid audible clipping distortion.Rickety stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. The EP2000 features a defeatable Low Cut Filter that chops off unwanted frequencies below 50 Hz or 30 Hz (depending on your PA system’s capabilities). The same panel contains the switches that puts this amp to work in either Stereo or Bridge (mono) mode. The EP2000 can be linked to additional power amps by switching into Parallel mode.There are plenty of awesome features on the outside of the EP2000, but there’s also a team of cool components on the inside helping it work its magic. It comes loaded with famously reliable Toshiba/Fairchild power transistors, as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers.The EP2000 has both XLR and 1/4" TRS Inputs, plus Speakon-compatible Outputs and 5-way binding posts. Whether you’re dealing with bare wire or boutique audiophile cabling, the EP2000 is right at home.The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps this amp working at cooler temperatures, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rack-mount chassis helps this workhorse stand up to all the rigors of the road.Features2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)ATR (Accelerated Transient Response) technology for ultimate punch and claritySwitchable limiters offer maximum output level with reliable overload protectionDetented gain controls for precise setting and matching of sensitivityPrecise Power, Signal and Clip LEDs to monitor performanceXLR and 1/4" TRS input connectors for compatibility with any sourceProfessional speaker connectors and "touch-proof" binding posts support most speaker wiring systemsSelectable low-frequency filters remove damaging infra-sound frequenciesIndependent DC and thermal overload protection on each channel automatically protects amplifier and speakersHigh-current toroidal transformer for ultra-high transient response and absolute reliability"Back-to-front" ventilation system including air filter for reliable operation"Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassisHigh-quality components and exceptionally rugged construction ensure long lifeConceived and designed by Behringer GermanySpecificationsDistortion:300 @ 8 ohmsNoise, unweighted, 20Hz-20kHz: -100dBVoltage Gain: 40X (32dB); 50X (34dB)Input Sensitivity, VRMS (@ 8 ohms): 1.15V (+3.4dBu)Input Impedance: 10k ohms unbalanced, 20k ohm balancedControls:Front: Power switch, gain control (channels 1 and 2)Rear: DIP switches(10x)Input Connectors: Balanced XLR and 1/4" TRS connectorsOutput Connectors: Touch-proof binding posts and professional speaker (Speakon) connectorsCooling: Continuously variable speed fan,back-to-front air flowAmplifier Protection: Full short circuit, open circuit, thermal and HF protection; Stable into reactive or mismatched loadsLoad Protection: Turn-on/off muting AC couplingOutput Circuit Type: Class H complementary linear outputPower Supply:Mains Voltage/Breaker: 220-230V~, 50/60Hz8APower Consumption: 2600WMains Connector: Standard IEC receptacleOutput Power:RMS @ 1% THD (Sine Wave), Both Channels ... Behringer EP2000 2-Channel Power Amplifier, 750W at 4 Ohm.
Price now:
From
$419.00
To
$439.99
Full Compass Systems
20.06% (+ $70.00)
New
$419.00
Reverb (US) | $419.00Free Delivery | Store |
Full Compass Systems | $419.00Free Delivery | Store |
Reverb (US) | $439.99Free Delivery | Store |
Product Description
The Behringer EUROPOWER EP2000 stereo power amplifier features excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With a maximum of 2000 Watts (Bridge Mono Mode) the EP2000 amplifier is perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.The über-simple front panel controls of this amp gives you all of your sound’s vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. Since this all happens in just a few thousandths of a second, it’s the ideal way to avoid audible clipping distortion.Rickety stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. The EP2000 features a defeatable Low Cut Filter that chops off unwanted frequencies below 50 Hz or 30 Hz (depending on your PA system’s capabilities). The same panel contains the switches that puts this amp to work in either Stereo or Bridge (mono) mode. The EP2000 can be linked to additional power amps by switching into Parallel mode.There are plenty of awesome features on the outside of the EP2000, but there’s also a team of cool components on the inside helping it work its magic. It comes loaded with famously reliable Toshiba/Fairchild power transistors, as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers.The EP2000 has both XLR and 1/4" TRS Inputs, plus Speakon-compatible Outputs and 5-way binding posts. Whether you’re dealing with bare wire or boutique audiophile cabling, the EP2000 is right at home.The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps this amp working at cooler temperatures, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rack-mount chassis helps this workhorse stand up to all the rigors of the road.Features2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)ATR (Accelerated Transient Response) technology for ultimate punch and claritySwitchable limiters offer maximum output level with reliable overload protectionDetented gain controls for precise setting and matching of sensitivityPrecise Power, Signal and Clip LEDs to monitor performanceXLR and 1/4" TRS input connectors for compatibility with any sourceProfessional speaker connectors and "touch-proof" binding posts support most speaker wiring systemsSelectable low-frequency filters remove damaging infra-sound frequenciesIndependent DC and thermal overload protection on each channel automatically protects amplifier and speakersHigh-current toroidal transformer for ultra-high transient response and absolute reliability"Back-to-front" ventilation system including air filter for reliable operation"Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassisHigh-quality components and exceptionally rugged construction ensure long lifeConceived and designed by Behringer GermanySpecificationsDistortion:300 @ 8 ohmsNoise, unweighted, 20Hz-20kHz: -100dBVoltage Gain: 40X (32dB); 50X (34dB)Input Sensitivity, VRMS (@ 8 ohms): 1.15V (+3.4dBu)Input Impedance: 10k ohms unbalanced, 20k ohm balancedControls:Front: Power switch, gain control (channels 1 and 2)Rear: DIP switches(10x)Input Connectors: Balanced XLR and 1/4" TRS connectorsOutput Connectors: Touch-proof binding posts and professional speaker (Speakon) connectorsCooling: Continuously variable speed fan,back-to-front air flowAmplifier Protection: Full short circuit, open circuit, thermal and HF protection; Stable into reactive or mismatched loadsLoad Protection: Turn-on/off muting AC couplingOutput Circuit Type: Class H complementary linear outputPower Supply:Mains Voltage/Breaker: 220-230V~, 50/60Hz8APower Consumption: 2600WMains Connector: Standard IEC receptacleOutput Power:RMS @ 1% THD (Sine Wave), Both Channels ... Behringer EP2000 2-Channel Power Amplifier, 750W at 4 Ohm.
Product Specifications
General | |
|---|---|
Size | 2 |
Brand | Behringer |
Color | light |
Material | mode |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.