Radial 678 Sgi Tx Instrument Line Driver Transmitter
The SGI-TX is the transmitting half of a high performance line driver system for guitars that takes an unbalanced instrument signal and drives it as far as 100 meters (300ft) without noise.Perfect for in the studio, the SGI-TX can send guitar signals across long distances without signal degradation or noise while retaining the original tone of the instrument. There, it allows the guitarist to sit in the control room and play while connected to a guitar amp isolated in another room. In a live stage performance, the SGI can be used to play the guitar amp using off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers.The SGI employs a proprietary drive and balancing circuit that is made up of two modules: the SGI-TX transmit module and SGI-RX receive module (sold separately). The SGI-TX is active with 100% discreet class-A circuitry and Drag™ control load correction to ensure the most natural sound. The SGI-RX is completely passive. To eliminate hum and buzz caused by ground loops, each module is equipped with isolation transformers that are wired in opposing directions to counteract any artifact.To purchase the full SGI studio guitar interface, look up the Radial SGI. For the receiver half only, look up the Radial SGI-RX.FeaturesBalanced line driver for guitar and bassSend signal up to 100 meters (300ft) without lossJensen transformers for optimal sound qualityDelivers natural tone to off-stage amplifiersCan be powered by standard 9V pedalboard power suppliesSpecificationsCircuit type: Active class-A circuit - transformer isolatedFrequency response: 20 Hz to 18 kHz (-2 dB)Dynamic Range: 112 dBTotal Harmonic Distortion: 0.005% @ 1kIntermodulation Distortion: 0.04% @ 1 kSGI-TX high-Z input: 1/4" jack - buffered - with Drag™ control load correction circuitInput Impedance: Variable from 10 kΩ - 1 MΩMaximum Input: +10 dBuSGI-TX Output: Balanced XLR-M outputNoise: -102 dBuGround Lift: Yes - LIFT switch on SGI-RXPower Supply: Included - 15VDC 400ma , center +Construction: 14-gauge steel chassis and outer shell, baked enamel finishPower: +15VDC/400mA adapter includedConditions: For use in dry locations only, 5-40°CSize (H x W x D): 1.75" x 2.75" x 4.25"Weight: 3 lbs (1.36 kg) Radial Engineering SGI-TX Studio Guitar Interface, Transmitter Only.
Price now:
From
$144.99
To
$189.99
Price History:
Details:Radial 678 Sgi Tx Instrument Line Driver Transmitter
The SGI-TX is the transmitting half of a high performance line driver system for guitars that takes an unbalanced instrument signal and drives it as far as 100 meters (300ft) without noise.Perfect for in the studio, the SGI-TX can send guitar signals across long distances without signal degradation or noise while retaining the original tone of the instrument. There, it allows the guitarist to sit in the control room and play while connected to a guitar amp isolated in another room. In a live stage performance, the SGI can be used to play the guitar amp using off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers.The SGI employs a proprietary drive and balancing circuit that is made up of two modules: the SGI-TX transmit module and SGI-RX receive module (sold separately). The SGI-TX is active with 100% discreet class-A circuitry and Drag™ control load correction to ensure the most natural sound. The SGI-RX is completely passive. To eliminate hum and buzz caused by ground loops, each module is equipped with isolation transformers that are wired in opposing directions to counteract any artifact.To purchase the full SGI studio guitar interface, look up the Radial SGI. For the receiver half only, look up the Radial SGI-RX.FeaturesBalanced line driver for guitar and bassSend signal up to 100 meters (300ft) without lossJensen transformers for optimal sound qualityDelivers natural tone to off-stage amplifiersCan be powered by standard 9V pedalboard power suppliesSpecificationsCircuit type: Active class-A circuit - transformer isolatedFrequency response: 20 Hz to 18 kHz (-2 dB)Dynamic Range: 112 dBTotal Harmonic Distortion: 0.005% @ 1kIntermodulation Distortion: 0.04% @ 1 kSGI-TX high-Z input: 1/4" jack - buffered - with Drag™ control load correction circuitInput Impedance: Variable from 10 kΩ - 1 MΩMaximum Input: +10 dBuSGI-TX Output: Balanced XLR-M outputNoise: -102 dBuGround Lift: Yes - LIFT switch on SGI-RXPower Supply: Included - 15VDC 400ma , center +Construction: 14-gauge steel chassis and outer shell, baked enamel finishPower: +15VDC/400mA adapter includedConditions: For use in dry locations only, 5-40°CSize (H x W x D): 1.75" x 2.75" x 4.25"Weight: 3 lbs (1.36 kg) Radial Engineering SGI-TX Studio Guitar Interface, Transmitter Only.
Price now:
From
$144.99
To
$189.99
This site contains affiliate links for which we may be compensated.
Reverb (US)
6.45% ( -$10.00)
Used
$144.99
$154.99
Full Compass Systems
5.56% (+ $10.00)
New
$189.99
Reverb (US)
5.56% (+ $10.00)
New
$189.99
Reverb (US) | $144.99Free Delivery | Store |
Reverb (US) | $189.99Free Delivery | Store |
Reverb (US) | $189.99Free Delivery | Store |
Full Compass Systems | $189.99Free Delivery | Store |
Reverb (US) | $189.99Free Delivery | Store |
Reverb (US) | $189.99Free Delivery | Store |
Currently Unavailable
Product Description
The SGI-TX is the transmitting half of a high performance line driver system for guitars that takes an unbalanced instrument signal and drives it as far as 100 meters (300ft) without noise.Perfect for in the studio, the SGI-TX can send guitar signals across long distances without signal degradation or noise while retaining the original tone of the instrument. There, it allows the guitarist to sit in the control room and play while connected to a guitar amp isolated in another room. In a live stage performance, the SGI can be used to play the guitar amp using off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers.The SGI employs a proprietary drive and balancing circuit that is made up of two modules: the SGI-TX transmit module and SGI-RX receive module (sold separately). The SGI-TX is active with 100% discreet class-A circuitry and Drag™ control load correction to ensure the most natural sound. The SGI-RX is completely passive. To eliminate hum and buzz caused by ground loops, each module is equipped with isolation transformers that are wired in opposing directions to counteract any artifact.To purchase the full SGI studio guitar interface, look up the Radial SGI. For the receiver half only, look up the Radial SGI-RX.FeaturesBalanced line driver for guitar and bassSend signal up to 100 meters (300ft) without lossJensen transformers for optimal sound qualityDelivers natural tone to off-stage amplifiersCan be powered by standard 9V pedalboard power suppliesSpecificationsCircuit type: Active class-A circuit - transformer isolatedFrequency response: 20 Hz to 18 kHz (-2 dB)Dynamic Range: 112 dBTotal Harmonic Distortion: 0.005% @ 1kIntermodulation Distortion: 0.04% @ 1 kSGI-TX high-Z input: 1/4" jack - buffered - with Drag™ control load correction circuitInput Impedance: Variable from 10 kΩ - 1 MΩMaximum Input: +10 dBuSGI-TX Output: Balanced XLR-M outputNoise: -102 dBuGround Lift: Yes - LIFT switch on SGI-RXPower Supply: Included - 15VDC 400ma , center +Construction: 14-gauge steel chassis and outer shell, baked enamel finishPower: +15VDC/400mA adapter includedConditions: For use in dry locations only, 5-40°CSize (H x W x D): 1.75" x 2.75" x 4.25"Weight: 3 lbs (1.36 kg) Radial Engineering SGI-TX Studio Guitar Interface, Transmitter Only.
Product Specifications
General | |
|---|---|
Color | 678 |
Brand | Radial |
Size | 01 |
Material | steel |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.