The Radial Engineering LX-3 is a passive line-level splitter that distribute a balanced audio signal to up to three destinations noiselessly. It features premium Jensen isolation transformers for exceptional audio quality, and XLR/TRS combo inputs for easy connectivity.The LX-3 has three XLR outputs, two of which are transformer isolated. The splitter has ground lifts on each XLR output to further reduce buzz and hum from ground loops, ensuring that the signal reaches each destination noise-free. For especially hot input signals, a -12 dB pad switch can be activated to cool down the signal.As with all Radial products, it is built with tough materials and the bookend shape protects your connections in case of drops. For a reliable and noiseless line splitter, why look anywhere else than the Radial LX-3?FeaturesSend one audio signal to three destinations simultaneouslyJensen transformer-equipped for exceptional audio qualityEliminates hum and buzz caused by ground loopsCombo jack input for 1/4" TRS or XLR sourcesSpecificationsAudio Circuit Type: Passive, transformer basedTransformer: Jensen JT-123-FLPCH# of Channels: 1 in, 3 OutFrequency Response: 20 Hz to 20 kHz, ±0.5 dBDynamic Range: 140 dBGain: -1.5 dBPhase Deviation: +0.6° @ 20 HzCommon Mode Rejection Ratio: 105 dB @ 60 Hz, 70 dB @ 3 kHzNoise: -120 dBuInput Connector: Comobo XLR/TRSInput Impedance: 712 ΩMaximum Input: +20 dBuOutput Connectors: 3 x XLR (two isolated, one direct)Output Impedance: 112 ΩFeatures: Input pad, ground liftsConstruction: 14-gauge steelPower: Passive, no power requiredConditions: For use in dry locations only, 5-40°CDimensions: 2" x 3.3" x 5" (48 x 84 x 127 mm)Weight: 1.5 lbs (0.7 kg) Radial Engineering LX3 Line Splitter, Passive, 1 Input, 1 Direct Out and 2 Jensen Isolated Outputs.