Radial 2019 R800 8016 00
The Radial McBoost™ is a high performance microphone signal booster designed to elevate the output of a typical dynamic microphone for greater transient response, and to boost the signal of a low-output ribbon mic to bring it up to a usable level for mixing consoles or preamps that may not provide sufficient gain.The 100% discrete class-A circuit design begins with a dual-transistor J-FET circuit to produce up to 26 dB of gain without introducing noise, color or artifact. Each individual transistor is carefully measured and batch-sorted to comply with the design specification to certify performance. As with all Radial™ products, the circuit board is then loaded into a 14-gauge, I-beam, reinforced steel enclosure to prevent outside stress from torquing which otherwise could lead to premature part failure. A book-end cover creates protective zones at each end to safeguard the switches, potentiometer and connectors from the rigours of the road.Merely connect the McBoost in-line using standard 3-pin XLRs and activate 48V phantom to provide power. Select between three impedance settings to optimize the response and then reduce low-frequency clutter with the 3-position high-pass filter. The McBoost will elevate the output to produce added clarity, excitement and extra drive for long cables whether you are in a recording studio, on a live concert stage or in a broadcast center.Features26 dB signal booster for dynamic & ribbon micsExtends dynamic range and microphone reachUses standard 48V phantom for power3-position load switch and high-pass filterSpecificationsAudio Circuit Type: Class-A differential DC coupled FETFrequency Response:30 kHzDynamic Range: 116 dBGain: +26 full gain, +20 half gain, +4 to +25 dB variable gainClip Level: +16 dBu (output)Total Harmonic Distortion: 0.006%Intermodulation Distortion: 0.01%Phase Deviation:< 10°Common Mode Rejection Ratio: -125 dBuEquivalent Input Noise: -125 dBuNoise: -100 / -110 dBuInput Connector: XLR femaleImpedance: 600 Ω / 2.7 kΩ / 30 kΩOutput Connector: XLR maleImpedance: 220 ΩConstruction: Cold Rolled SteelPower: +48V phantom powerConditions: For use in dry locations only, 5-40°CDimensions (H x W x D): 1.75" x 2.75" x 4.25" Radial Engineering McBoost Mic Signal Booster, Class-A Fet with 25dB Gain, Load Adjust and Filter.
Price now:
From
$199.99
To
$200.11
Price History:
Details:Radial 2019 R800 8016 00
The Radial McBoost™ is a high performance microphone signal booster designed to elevate the output of a typical dynamic microphone for greater transient response, and to boost the signal of a low-output ribbon mic to bring it up to a usable level for mixing consoles or preamps that may not provide sufficient gain.The 100% discrete class-A circuit design begins with a dual-transistor J-FET circuit to produce up to 26 dB of gain without introducing noise, color or artifact. Each individual transistor is carefully measured and batch-sorted to comply with the design specification to certify performance. As with all Radial™ products, the circuit board is then loaded into a 14-gauge, I-beam, reinforced steel enclosure to prevent outside stress from torquing which otherwise could lead to premature part failure. A book-end cover creates protective zones at each end to safeguard the switches, potentiometer and connectors from the rigours of the road.Merely connect the McBoost in-line using standard 3-pin XLRs and activate 48V phantom to provide power. Select between three impedance settings to optimize the response and then reduce low-frequency clutter with the 3-position high-pass filter. The McBoost will elevate the output to produce added clarity, excitement and extra drive for long cables whether you are in a recording studio, on a live concert stage or in a broadcast center.Features26 dB signal booster for dynamic & ribbon micsExtends dynamic range and microphone reachUses standard 48V phantom for power3-position load switch and high-pass filterSpecificationsAudio Circuit Type: Class-A differential DC coupled FETFrequency Response:30 kHzDynamic Range: 116 dBGain: +26 full gain, +20 half gain, +4 to +25 dB variable gainClip Level: +16 dBu (output)Total Harmonic Distortion: 0.006%Intermodulation Distortion: 0.01%Phase Deviation:< 10°Common Mode Rejection Ratio: -125 dBuEquivalent Input Noise: -125 dBuNoise: -100 / -110 dBuInput Connector: XLR femaleImpedance: 600 Ω / 2.7 kΩ / 30 kΩOutput Connector: XLR maleImpedance: 220 ΩConstruction: Cold Rolled SteelPower: +48V phantom powerConditions: For use in dry locations only, 5-40°CDimensions (H x W x D): 1.75" x 2.75" x 4.25" Radial Engineering McBoost Mic Signal Booster, Class-A Fet with 25dB Gain, Load Adjust and Filter.
Price now:
From
$199.99
To
$200.11
This site contains affiliate links for which we may be compensated.
Reverb (US)
0.00% (~ $$v)
New
$199.99
Full Compass Systems
13.04% ( -$30.00)
New
$199.99
Reverb (US) | $199.99Free Delivery | Store |
Full Compass Systems | $199.99Free Delivery | Store |
Reverb (US) | $199.99Free Delivery | Store |
Reverb (US) | $199.99Free Delivery | Store |
Reverb (US) | $199.99Free Delivery | Store |
Reverb (US) | $200.11Free Delivery | Store |
Product Description
The Radial McBoost™ is a high performance microphone signal booster designed to elevate the output of a typical dynamic microphone for greater transient response, and to boost the signal of a low-output ribbon mic to bring it up to a usable level for mixing consoles or preamps that may not provide sufficient gain.The 100% discrete class-A circuit design begins with a dual-transistor J-FET circuit to produce up to 26 dB of gain without introducing noise, color or artifact. Each individual transistor is carefully measured and batch-sorted to comply with the design specification to certify performance. As with all Radial™ products, the circuit board is then loaded into a 14-gauge, I-beam, reinforced steel enclosure to prevent outside stress from torquing which otherwise could lead to premature part failure. A book-end cover creates protective zones at each end to safeguard the switches, potentiometer and connectors from the rigours of the road.Merely connect the McBoost in-line using standard 3-pin XLRs and activate 48V phantom to provide power. Select between three impedance settings to optimize the response and then reduce low-frequency clutter with the 3-position high-pass filter. The McBoost will elevate the output to produce added clarity, excitement and extra drive for long cables whether you are in a recording studio, on a live concert stage or in a broadcast center.Features26 dB signal booster for dynamic & ribbon micsExtends dynamic range and microphone reachUses standard 48V phantom for power3-position load switch and high-pass filterSpecificationsAudio Circuit Type: Class-A differential DC coupled FETFrequency Response:30 kHzDynamic Range: 116 dBGain: +26 full gain, +20 half gain, +4 to +25 dB variable gainClip Level: +16 dBu (output)Total Harmonic Distortion: 0.006%Intermodulation Distortion: 0.01%Phase Deviation:< 10°Common Mode Rejection Ratio: -125 dBuEquivalent Input Noise: -125 dBuNoise: -100 / -110 dBuInput Connector: XLR femaleImpedance: 600 Ω / 2.7 kΩ / 30 kΩOutput Connector: XLR maleImpedance: 220 ΩConstruction: Cold Rolled SteelPower: +48V phantom powerConditions: For use in dry locations only, 5-40°CDimensions (H x W x D): 1.75" x 2.75" x 4.25" Radial Engineering McBoost Mic Signal Booster, Class-A Fet with 25dB Gain, Load Adjust and Filter.
Product Specifications
General | |
|---|---|
Brand | Radial |
Material | steel/lead/mode |
Size | 26 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.