











Give your ribbon mics the power they deserve with the AEA TRP3 preamp. This 3rd generation circuit design provides two channels of high-output, high-impedance, and low-noise gain with a rich, natural sound that brings out the full potential of your microphones. Designed specifically for ribbon microphones, the TRP3 excels at drawing out the warm and lush sound that ribbons are uniquely known for. With 85db of output, the TRP3 gives you enough clean gain to record soft sources minus the noise typically associated with ribbon mics. With the TRP3, you will never consider a source too quiet to record with a ribbon mic again. This half-rack powerhouse provides unparalleled high gain and low noise thanks to AEA's clean musical circuit design.AEA TRP3 Features:Two-channel, high-gain, half-rack mic preUltra-high 68K⦠input impedance (phantom power off)7 to 85 dB of gain48V phantom and polarity switchHPF switchable -3dB at 115 Hz or 230 HzExternal PSUOptional rack ears (for one unit) or rack shelf (two units) for mounting purposesAEA TRP3 Specifications:Max Gain at 1 kHz: 85 dBEIN (Max gain, 22 Hz to 22 KHz, unweighted):130 dBu (typical), 40 Ω source128 dBu (typical), 150 Ω sourceFrequency Response:30 dB gain: (-0.5 dB from85 dB gain: (-3 dB 9Hz to >200 kHz)THD+N: 0.0015% (1 kHz, 22 Hz-22 kHz @30 dB Gain +4 dBu output)XLR Output Max Level: +27 dBu into 600 Ω loadInput Impedance: 11.3 kΩ (with Phantom), 68 kΩ (no Phantom)Output Impedance: 50 ΩMax Input Signal Level: +20 dBu (minimum gain)Stepped Gain Control: 12-position switch from +7 dB to +65 dBOutput Trim: Continuously variable from 0 dB to +20 dBEQ Circuitry:Switchable, passive first-order high-pass filterSelectable frequencies (-3 dB) at either 115 Hz or 230 HzInput and Output XLR Polarity: Pin 2 hotLED Signal Level Indicators:Green LED ≅ -20 dBu;Yellow LED = 0 dBu;Red LED ≅ +20 dBu (clipping +27 dBu) AEA TRP3 Ribbon Mic 2 Channel 1/2 Rack Preamp.
Price now:
From
To
Price History:
Details:Give your ribbon mics the power they deserve with the AEA TRP3 preamp. This 3rd generation circuit design provides two channels of high-output, high-impedance, and low-noise gain with a rich, natural sound that brings out the full potential of your microphones. Designed specifically for ribbon microphones, the TRP3 excels at drawing out the warm and lush sound that ribbons are uniquely known for. With 85db of output, the TRP3 gives you enough clean gain to record soft sources minus the noise typically associated with ribbon mics. With the TRP3, you will never consider a source too quiet to record with a ribbon mic again. This half-rack powerhouse provides unparalleled high gain and low noise thanks to AEA's clean musical circuit design.AEA TRP3 Features:Two-channel, high-gain, half-rack mic preUltra-high 68K⦠input impedance (phantom power off)7 to 85 dB of gain48V phantom and polarity switchHPF switchable -3dB at 115 Hz or 230 HzExternal PSUOptional rack ears (for one unit) or rack shelf (two units) for mounting purposesAEA TRP3 Specifications:Max Gain at 1 kHz: 85 dBEIN (Max gain, 22 Hz to 22 KHz, unweighted):130 dBu (typical), 40 Ω source128 dBu (typical), 150 Ω sourceFrequency Response:30 dB gain: (-0.5 dB from85 dB gain: (-3 dB 9Hz to >200 kHz)THD+N: 0.0015% (1 kHz, 22 Hz-22 kHz @30 dB Gain +4 dBu output)XLR Output Max Level: +27 dBu into 600 Ω loadInput Impedance: 11.3 kΩ (with Phantom), 68 kΩ (no Phantom)Output Impedance: 50 ΩMax Input Signal Level: +20 dBu (minimum gain)Stepped Gain Control: 12-position switch from +7 dB to +65 dBOutput Trim: Continuously variable from 0 dB to +20 dBEQ Circuitry:Switchable, passive first-order high-pass filterSelectable frequencies (-3 dB) at either 115 Hz or 230 HzInput and Output XLR Polarity: Pin 2 hotLED Signal Level Indicators:Green LED ≅ -20 dBu;Yellow LED = 0 dBu;Red LED ≅ +20 dBu (clipping +27 dBu) AEA TRP3 Ribbon Mic 2 Channel 1/2 Rack Preamp.
Price now:
From
To
This site contains affiliate links for which we may be compensated.
Full Compass Systems
0.00% (~ $$v)
New
$1,299.00
Full Compass Systems | $1,299.00Free Delivery | |
Reverb (US) | $1,349.00Free Delivery | |
Reverb (US) | $1,349.00Free Delivery | |
Reverb (US) | $1,349.00Free Delivery |
Give your ribbon mics the power they deserve with the AEA TRP3 preamp. This 3rd generation circuit design provides two channels of high-output, high-impedance, and low-noise gain with a rich, natural sound that brings out the full potential of your microphones. Designed specifically for ribbon microphones, the TRP3 excels at drawing out the warm and lush sound that ribbons are uniquely known for. With 85db of output, the TRP3 gives you enough clean gain to record soft sources minus the noise typically associated with ribbon mics. With the TRP3, you will never consider a source too quiet to record with a ribbon mic again. This half-rack powerhouse provides unparalleled high gain and low noise thanks to AEA's clean musical circuit design.AEA TRP3 Features:Two-channel, high-gain, half-rack mic preUltra-high 68K⦠input impedance (phantom power off)7 to 85 dB of gain48V phantom and polarity switchHPF switchable -3dB at 115 Hz or 230 HzExternal PSUOptional rack ears (for one unit) or rack shelf (two units) for mounting purposesAEA TRP3 Specifications:Max Gain at 1 kHz: 85 dBEIN (Max gain, 22 Hz to 22 KHz, unweighted):130 dBu (typical), 40 Ω source128 dBu (typical), 150 Ω sourceFrequency Response:30 dB gain: (-0.5 dB from85 dB gain: (-3 dB 9Hz to >200 kHz)THD+N: 0.0015% (1 kHz, 22 Hz-22 kHz @30 dB Gain +4 dBu output)XLR Output Max Level: +27 dBu into 600 Ω loadInput Impedance: 11.3 kΩ (with Phantom), 68 kΩ (no Phantom)Output Impedance: 50 ΩMax Input Signal Level: +20 dBu (minimum gain)Stepped Gain Control: 12-position switch from +7 dB to +65 dBOutput Trim: Continuously variable from 0 dB to +20 dBEQ Circuitry:Switchable, passive first-order high-pass filterSelectable frequencies (-3 dB) at either 115 Hz or 230 HzInput and Output XLR Polarity: Pin 2 hotLED Signal Level Indicators:Green LED ≅ -20 dBu;Yellow LED = 0 dBu;Red LED ≅ +20 dBu (clipping +27 dBu) AEA TRP3 Ribbon Mic 2 Channel 1/2 Rack Preamp.
General | |
|---|---|
Color | green/yellow/red |
Size | 2 |
Brand | AEA |
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.