Yamaha Pink “4-Channel 70V / 4 Ohm / 8 Ohm Power Amplifier“
“The Yamaha XMV4140-D 4 channel power amplifier has features are designed sepcifically to benefit installation sound systems.Yamaha XMV4140-D Features:Four-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4 Ohm/8 Ohm) modes simultaneously.70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels.Double Power Mode function effectively doubles the output power of selected channels. Equipped with Audinate's digital audio network Dantefor simple and fast system configuration. Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series.An innovative patent pending circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of the amplifier's output stage up to over 90%.Feature a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount ofPowerful, intelligent protection features for more reliable operation.Yamaha XMV4140-D Specifications:Output Power (1 kHz, THD+N = 1%):4 Ohms: 140W x 4 8 Ohms: 140W x 4 4 Ohms/Double Power Mode: 280W x 2 8 Ohms/Double Power Mode: 280W x 2Output Power (High Impedance):100V line: 125W x 4 / 80 Ohm 70V line: 125W x 4 / 40 OhmVoltage Gain:RL = 8 Ohms: 28.7 dB RL = 8 Ohms / Double Power Mode: 31.7 dB 100V: 38.2 dB 70V: 35.2 dBInput Sensitivity (RL = 8 Ohms): +4 dBuS/N Ratio (A-weighted): >/= 100 dBPower Consumption:1/8 power (4 Ohm pink noise): 150W Idle (4 Ohms): 37W Standby: 18.5WTHD+N (1 kHz, half power): < /= 0.2%Frequency Response (RL = 8 Ohms, 100V/70V, Po =1W,20Hz-20kHz): 0 dB, +/- 1 dBCrosstalk (1 kHz, half power, 8 Ohms, Att. max. input150 Ohm shunt): < / = 60 dBMaximum Input Level: +24 dBuInput Impedance: 20 kOhm balanced, 10 kOhm unbalancedConnectors:Analog Input: Euroblock x 2 (6P, balanced) Digital Input / Output: RJ45 x 2 (Dante Primary / Secondary) Speaker Output: Barrier strip x 4 pairs Network: RJ45 x 1 Remote, Fault Output: Shared with Dante ports AC IN: AC Inlet x 1Load Protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limitingAmplifier Protection:Thermal: Output mute (heatsink temp =90 °C) (Restored automatically) Overcurrent: Output mute (Restored automatically) Low load impedance: Output mute (Restored automatically)Power Supply Protection:Thermal: Amplifier shuts down automatically (heatsink temp =100 °C) Integrated power: Gain reduction (Restored automatically)Cooling Fan: 3-Speed fan x 2, front-to-back airflowPower Requirements: 100V, 120V, 230V-240V; 50Hz/60HzDimensions (WxHxD): 18.9" x 3.5" x 16.6" (480 x 88 x422 mm)Weight: 17.9 lbs (8.1 kg) “
Price now:
$1,901.00
Price History:
Details:Yamaha Pink “4-Channel 70V / 4 Ohm / 8 Ohm Power Amplifier“
“The Yamaha XMV4140-D 4 channel power amplifier has features are designed sepcifically to benefit installation sound systems.Yamaha XMV4140-D Features:Four-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4 Ohm/8 Ohm) modes simultaneously.70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels.Double Power Mode function effectively doubles the output power of selected channels. Equipped with Audinate's digital audio network Dantefor simple and fast system configuration. Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series.An innovative patent pending circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of the amplifier's output stage up to over 90%.Feature a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount ofPowerful, intelligent protection features for more reliable operation.Yamaha XMV4140-D Specifications:Output Power (1 kHz, THD+N = 1%):4 Ohms: 140W x 4 8 Ohms: 140W x 4 4 Ohms/Double Power Mode: 280W x 2 8 Ohms/Double Power Mode: 280W x 2Output Power (High Impedance):100V line: 125W x 4 / 80 Ohm 70V line: 125W x 4 / 40 OhmVoltage Gain:RL = 8 Ohms: 28.7 dB RL = 8 Ohms / Double Power Mode: 31.7 dB 100V: 38.2 dB 70V: 35.2 dBInput Sensitivity (RL = 8 Ohms): +4 dBuS/N Ratio (A-weighted): >/= 100 dBPower Consumption:1/8 power (4 Ohm pink noise): 150W Idle (4 Ohms): 37W Standby: 18.5WTHD+N (1 kHz, half power): < /= 0.2%Frequency Response (RL = 8 Ohms, 100V/70V, Po =1W,20Hz-20kHz): 0 dB, +/- 1 dBCrosstalk (1 kHz, half power, 8 Ohms, Att. max. input150 Ohm shunt): < / = 60 dBMaximum Input Level: +24 dBuInput Impedance: 20 kOhm balanced, 10 kOhm unbalancedConnectors:Analog Input: Euroblock x 2 (6P, balanced) Digital Input / Output: RJ45 x 2 (Dante Primary / Secondary) Speaker Output: Barrier strip x 4 pairs Network: RJ45 x 1 Remote, Fault Output: Shared with Dante ports AC IN: AC Inlet x 1Load Protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limitingAmplifier Protection:Thermal: Output mute (heatsink temp =90 °C) (Restored automatically) Overcurrent: Output mute (Restored automatically) Low load impedance: Output mute (Restored automatically)Power Supply Protection:Thermal: Amplifier shuts down automatically (heatsink temp =100 °C) Integrated power: Gain reduction (Restored automatically)Cooling Fan: 3-Speed fan x 2, front-to-back airflowPower Requirements: 100V, 120V, 230V-240V; 50Hz/60HzDimensions (WxHxD): 18.9" x 3.5" x 16.6" (480 x 88 x422 mm)Weight: 17.9 lbs (8.1 kg) “
Price now:
$1,901.00
Top Picks
This site contains affiliate links for which we may be compensated.
Prime Buy
0.00% (~ $$v)
New
$1,901.00
Prime Buy
0.00% (~ $$v)
New
$1,901.00
Product Description
“The Yamaha XMV4140-D 4 channel power amplifier has features are designed sepcifically to benefit installation sound systems.Yamaha XMV4140-D Features:Four-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4 Ohm/8 Ohm) modes simultaneously.70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels.Double Power Mode function effectively doubles the output power of selected channels. Equipped with Audinate's digital audio network Dantefor simple and fast system configuration. Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series.An innovative patent pending circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of the amplifier's output stage up to over 90%.Feature a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount ofPowerful, intelligent protection features for more reliable operation.Yamaha XMV4140-D Specifications:Output Power (1 kHz, THD+N = 1%):4 Ohms: 140W x 4 8 Ohms: 140W x 4 4 Ohms/Double Power Mode: 280W x 2 8 Ohms/Double Power Mode: 280W x 2Output Power (High Impedance):100V line: 125W x 4 / 80 Ohm 70V line: 125W x 4 / 40 OhmVoltage Gain:RL = 8 Ohms: 28.7 dB RL = 8 Ohms / Double Power Mode: 31.7 dB 100V: 38.2 dB 70V: 35.2 dBInput Sensitivity (RL = 8 Ohms): +4 dBuS/N Ratio (A-weighted): >/= 100 dBPower Consumption:1/8 power (4 Ohm pink noise): 150W Idle (4 Ohms): 37W Standby: 18.5WTHD+N (1 kHz, half power): < /= 0.2%Frequency Response (RL = 8 Ohms, 100V/70V, Po =1W,20Hz-20kHz): 0 dB, +/- 1 dBCrosstalk (1 kHz, half power, 8 Ohms, Att. max. input150 Ohm shunt): < / = 60 dBMaximum Input Level: +24 dBuInput Impedance: 20 kOhm balanced, 10 kOhm unbalancedConnectors:Analog Input: Euroblock x 2 (6P, balanced) Digital Input / Output: RJ45 x 2 (Dante Primary / Secondary) Speaker Output: Barrier strip x 4 pairs Network: RJ45 x 1 Remote, Fault Output: Shared with Dante ports AC IN: AC Inlet x 1Load Protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limitingAmplifier Protection:Thermal: Output mute (heatsink temp =90 °C) (Restored automatically) Overcurrent: Output mute (Restored automatically) Low load impedance: Output mute (Restored automatically)Power Supply Protection:Thermal: Amplifier shuts down automatically (heatsink temp =100 °C) Integrated power: Gain reduction (Restored automatically)Cooling Fan: 3-Speed fan x 2, front-to-back airflowPower Requirements: 100V, 120V, 230V-240V; 50Hz/60HzDimensions (WxHxD): 18.9" x 3.5" x 16.6" (480 x 88 x422 mm)Weight: 17.9 lbs (8.1 kg) “
Product Specifications
General | |
|---|---|
Color | pink |
Material | mode |
Size | 4 |
Brand | Yamaha |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.