Cloudlifter CL-2 2-channel Mic Activator is a simple, compact solution for common audio problems faced in the field and in the studio. Designed for passive dynamic principle microphones - including ribbons- the CL-2 safely uses any 24-48v phantom powered microphone input device to provide 20-25db* of ultra-clean transparent gain.Cloudlifters dramatically improve the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs, making them ideal for broadcast, live, and studio applications. Enclosed in a rugged steel enclosure offering excellent shielding, the CL-2 additionally has provisions for stage or stand mounting with the included strap.Using patent pending technology that keeps the direct audio path free-andclear of transformers, capacitors, and resistors, the CL-2 houses direct coupled, discrete JFET circuitry that delivers world class, ultra-clean gain while preserving the natural sonic characteristics of the source.*The amount of gain varies depending on the microphone and preamp combination. Generally speaking, using a Cloudlifter with lower impedance transformer coupled preamps will yield slightly less gain than with higher impedance transformer-less designs.Like all Cloud Microphones products, the Cloudlifter™ Mic Activator™ series is handcrafted using environmentally friendly methods, entirely in the USA.Cloudlifters are recommended for improving the signal to noise ratio and performance of passive microphone/preamp combinations with the following:recording direct into a DAW interfacenoisy or low gain preampsmixers/preamps that negatively impact the sound at higher gain settingspassive ribbon microphoneslow-output dynamic microphonesrecording softer sound sources such as acoustic instruments and voicelong cable runs (output)Features:Gives passive mics 20-25dB* additional active outputPowered by 24-48v phantom power from the secondary input deviceSafe for use with all passive ribbons with no transfer of phantom powerCompatible with dynamic microphonesUtilizes Patent Pending Ultra-transparent Discrete D/C JFET circuitryIdeal impedance loading for transparent performance @3000ohmsRugged, road ready and portable, for studio, stage and broadcastingEasy to use standalone design requires only phantom powerLifetime limited warranty for parts and laborHandcrafted entirely in the USACloud CLOUDLIFTER-CL2 SpecificationsPowerInput Impedance: 3k OhmsRecommended Load Impedance: >5K OhmsConnectivity: 3-pin male/female XLR connectorPowering: 48V Phantom Power (P48 according to IEC 61938)SoundFrequency range: 5 Hz - 80 kHz (-0.3 dB)Gain: Provides up to +25dB of Ultra-Clean Gain with 5k LoadCurrent consumption: 3.1 mADimensionswidth: 119.09 mm (4.72 in.)height: 40.89 mm (1.61 in.)length: 94 mm (3.7 in.)Product weight: 450 g (15.9 oz.) Cloud CLOUDLIFTER-CL2 CLOUDLIFTER-CL-2.