Yamaha Px10 Power Amplifier
The Yamaha PX10 versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 1000W x 2 at 8O / 1200W x 2 at 4O.IncludesUSB coverOwner's ManualSpecification sheetAC cable (2.0m)Features2x 1200W at 4ONewly developed Class-D amplifier engine with a custom LSIFlexible onboard PEQ, crossover, filters, delay, and limiter functionsYamaha Speaker presetsUtlities for safe and secure operationSpecificationsSampling frequency rate: 48kHzA/D D/A Converters: AD/DA: 24-bit linear, 128 times over samplingTotal harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)Frequency response: ±1.0dB (1W, 8O, 20Hz to 20kHz)S/N ratio: 101dB (A-weighted, 8O, Gain setting = +14dBu)Crosstalk: Less than -60dB (Half Power, 8O, 1kHz, Vol max input 150O shunt)Voltage Gain/Sensitivity:8O Volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)Maximum input voltage: +24dBuInput impedance: 20kO (Balance), 10kO (Unbalance)I/O Connectors:Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clampIndicators: POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off featureProcessors: Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)Latency: 1.5 msec (Analog Input to Speakers)Presets: 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)Protection circuit:Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)Amplifier protection: Thermal: Output limiter (Restored automatically) ? Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)Power supply protection: Thermal: Output limiter (Restored automatically) ? Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdownAmplifier class: Class D, Balanced output circuit (BTL)Cooling: 16 step variable speed fan x 2, front to rear airflowPower requirements: Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.Power consumption: 310W (1/8 MAX power, 4O, Pink noise at all channels), 60W (4O, Idling)Dimensions (WxHxD): 18-7/8" x 3-7/16" x 15-2/8" (480 x 88 x 388mm)Net weight: 7.4 kg (16.31 lbs)Others:Operating Temperature: 0°C to +40°CStorage temperature: -20°C to +60°C Yamaha PX10 2-Channel Power Amplifier, 2x1200W at 4 Ohms.
Price now:
From
$1,129.99
To
$1,199.99
Price History:
Details:Yamaha Px10 Power Amplifier
The Yamaha PX10 versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 1000W x 2 at 8O / 1200W x 2 at 4O.IncludesUSB coverOwner's ManualSpecification sheetAC cable (2.0m)Features2x 1200W at 4ONewly developed Class-D amplifier engine with a custom LSIFlexible onboard PEQ, crossover, filters, delay, and limiter functionsYamaha Speaker presetsUtlities for safe and secure operationSpecificationsSampling frequency rate: 48kHzA/D D/A Converters: AD/DA: 24-bit linear, 128 times over samplingTotal harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)Frequency response: ±1.0dB (1W, 8O, 20Hz to 20kHz)S/N ratio: 101dB (A-weighted, 8O, Gain setting = +14dBu)Crosstalk: Less than -60dB (Half Power, 8O, 1kHz, Vol max input 150O shunt)Voltage Gain/Sensitivity:8O Volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)Maximum input voltage: +24dBuInput impedance: 20kO (Balance), 10kO (Unbalance)I/O Connectors:Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clampIndicators: POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off featureProcessors: Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)Latency: 1.5 msec (Analog Input to Speakers)Presets: 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)Protection circuit:Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)Amplifier protection: Thermal: Output limiter (Restored automatically) ? Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)Power supply protection: Thermal: Output limiter (Restored automatically) ? Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdownAmplifier class: Class D, Balanced output circuit (BTL)Cooling: 16 step variable speed fan x 2, front to rear airflowPower requirements: Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.Power consumption: 310W (1/8 MAX power, 4O, Pink noise at all channels), 60W (4O, Idling)Dimensions (WxHxD): 18-7/8" x 3-7/16" x 15-2/8" (480 x 88 x 388mm)Net weight: 7.4 kg (16.31 lbs)Others:Operating Temperature: 0°C to +40°CStorage temperature: -20°C to +60°C Yamaha PX10 2-Channel Power Amplifier, 2x1200W at 4 Ohms.
Price now:
From
$1,129.99
To
$1,199.99
Full Compass Systems
3.81% (+ $44.00)
New
$1,199.99
Reverb (US) | $1,129.99Free Delivery | Store |
Reverb (US) | $1,155.99Free Delivery | Store |
Reverb (US) | $1,155.99Free Delivery | Store |
Reverb (US) | $1,155.99Free Delivery | Store |
Reverb (US) | $1,155.99Free Delivery | Store |
Full Compass Systems | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Product Description
The Yamaha PX10 versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 1000W x 2 at 8O / 1200W x 2 at 4O.IncludesUSB coverOwner's ManualSpecification sheetAC cable (2.0m)Features2x 1200W at 4ONewly developed Class-D amplifier engine with a custom LSIFlexible onboard PEQ, crossover, filters, delay, and limiter functionsYamaha Speaker presetsUtlities for safe and secure operationSpecificationsSampling frequency rate: 48kHzA/D D/A Converters: AD/DA: 24-bit linear, 128 times over samplingTotal harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)Frequency response: ±1.0dB (1W, 8O, 20Hz to 20kHz)S/N ratio: 101dB (A-weighted, 8O, Gain setting = +14dBu)Crosstalk: Less than -60dB (Half Power, 8O, 1kHz, Vol max input 150O shunt)Voltage Gain/Sensitivity:8O Volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)Maximum input voltage: +24dBuInput impedance: 20kO (Balance), 10kO (Unbalance)I/O Connectors:Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clampIndicators: POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off featureProcessors: Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)Latency: 1.5 msec (Analog Input to Speakers)Presets: 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)Protection circuit:Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)Amplifier protection: Thermal: Output limiter (Restored automatically) ? Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)Power supply protection: Thermal: Output limiter (Restored automatically) ? Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdownAmplifier class: Class D, Balanced output circuit (BTL)Cooling: 16 step variable speed fan x 2, front to rear airflowPower requirements: Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.Power consumption: 310W (1/8 MAX power, 4O, Pink noise at all channels), 60W (4O, Idling)Dimensions (WxHxD): 18-7/8" x 3-7/16" x 15-2/8" (480 x 88 x 388mm)Net weight: 7.4 kg (16.31 lbs)Others:Operating Temperature: 0°C to +40°CStorage temperature: -20°C to +60°C Yamaha PX10 2-Channel Power Amplifier, 2x1200W at 4 Ohms.
Product Specifications
General | |
|---|---|
Size | 1 |
Brand | Yamaha |
Color | green/red |
Gender | female |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.