Yamaha Xmv4280
XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The XMVquipped with the newly developed YDIF digital audio format for easy setup. Installed sound applications often demand both high and low impedance connectivity in the same venue, requiring separate, dedicated amplifiers or an external transformer. XMV power amplifiers, however, can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously, eliminating the need for additional equipment, as well as streamlining the installation process. XMV power amplifiers also enable both 70V and 100V operation for every pair of channels by simply selecting the preferred mode using the dip switches on the rear panel. High impedance operation often requires the use of two combined channels in bridge mode, but with XMV amplifiers, 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels. The newly developed Double Power Mode function effectively doubles the output power of selected channels in order to drive speakers with higher output power. This means that speakers with varying output capacities can be powered simultaneously by the same amplifier, adding flexibility to system design and configuration.*The number of channels that can be used will be reduced to half. XMV amplifiers come equipped with either the newly developed YDIF digital audio format, or Audinate’s digital audio network Dante. YDIF allows easy setup with the use of Ethernet cables while Dante models can be used for larger venues where long distant cabling is required.Features4x 280W at 8Ω/4Ω4x 250W at 100V/70V lines2x 560W at Double Power Mode (8Ω/4Ω)External control via EthernetProtection features for more reliable operationSpecificationsOutput Power (1 kHz, THD+N = 1%):4 Ohms: 280W x 48 Ohms: 280W x 44 Ohms/Double Power Mode: 560W x 28 Ohms/Double Power Mode: 560W x 2Output Power (High Impedance):100V line: 250W x 4 / 40 Ohm70V line: 250W x 4 / 20 OhmVoltage Gain:RL = 8 Ohms: 31.7 dBRL = 8 Ohms / Double Power Mode: 34.7 dB100V: 38.2 dB70V: 35.2 dBInput Sensitivity (RL = 8 Ohms): +4 dBuS/N Ratio (A-weighted): >/= 100 dBPower Consumption:1/8 power (4 Ohm pink noise): 250WIdle (4 Ohms): 37WStandby: 18.5WTHD+N (1 kHz, half power):< / = 0.2%Frequency Response (RL = 8 Ohms, 100V/70V, Po = 1W, 20Hz-20kHz): 0 dB, +/-1 dBCrosstalk (1 kHz, half power, 8 Ohms, Att. max. input 150 Ohm shunt):Maximum Input Level: +24 dBuInput Impedance: 20 kOhm balanced, 10 kOhm unbalancedConnectors:Analog Input: Euroblock x 2 (6P, balanced)Digital Input / Output: RJ45 x 2 (YDIF IN/OUT)Speaker Output: Barrier strip x 4 pairsNetwork: RJ45 x 1Remote, Fault Output: RJ45 x1AC IN: AC Inlet x 1Load Protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limitingAmplifier Protection:Thermal: Output mute (heatsink temp =90°C) (Restored automatically)Overcurrent: Output mute (Restored automatically)Low load impedance: Output mute (Restored automatically)Power Supply Protection:Thermal: Amplifier shuts down automatically (heatsink temp =100°C)Integrated power: Gain reduction (Restored automatically)Cooling Fan: 3-Speed fan x 2, front-to-back airflowPower Requirements: 100V, 120V, 230V-240V; 50Hz/60HzDimensions: 18.9" W x 3.5" H x 16.6" D (480 x 88 x 422 mm)Weight: 17.9 lbs (8.1 kg) Yamaha XMV4280 4-Channel 70V/4 Ohms/8 Ohms Power Amplifier with YDIF.
Price now:
From
$2,299.99
To
$2,874.99
Price History:
Details:Yamaha Xmv4280
XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The XMVquipped with the newly developed YDIF digital audio format for easy setup. Installed sound applications often demand both high and low impedance connectivity in the same venue, requiring separate, dedicated amplifiers or an external transformer. XMV power amplifiers, however, can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously, eliminating the need for additional equipment, as well as streamlining the installation process. XMV power amplifiers also enable both 70V and 100V operation for every pair of channels by simply selecting the preferred mode using the dip switches on the rear panel. High impedance operation often requires the use of two combined channels in bridge mode, but with XMV amplifiers, 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels. The newly developed Double Power Mode function effectively doubles the output power of selected channels in order to drive speakers with higher output power. This means that speakers with varying output capacities can be powered simultaneously by the same amplifier, adding flexibility to system design and configuration.*The number of channels that can be used will be reduced to half. XMV amplifiers come equipped with either the newly developed YDIF digital audio format, or Audinate’s digital audio network Dante. YDIF allows easy setup with the use of Ethernet cables while Dante models can be used for larger venues where long distant cabling is required.Features4x 280W at 8Ω/4Ω4x 250W at 100V/70V lines2x 560W at Double Power Mode (8Ω/4Ω)External control via EthernetProtection features for more reliable operationSpecificationsOutput Power (1 kHz, THD+N = 1%):4 Ohms: 280W x 48 Ohms: 280W x 44 Ohms/Double Power Mode: 560W x 28 Ohms/Double Power Mode: 560W x 2Output Power (High Impedance):100V line: 250W x 4 / 40 Ohm70V line: 250W x 4 / 20 OhmVoltage Gain:RL = 8 Ohms: 31.7 dBRL = 8 Ohms / Double Power Mode: 34.7 dB100V: 38.2 dB70V: 35.2 dBInput Sensitivity (RL = 8 Ohms): +4 dBuS/N Ratio (A-weighted): >/= 100 dBPower Consumption:1/8 power (4 Ohm pink noise): 250WIdle (4 Ohms): 37WStandby: 18.5WTHD+N (1 kHz, half power):< / = 0.2%Frequency Response (RL = 8 Ohms, 100V/70V, Po = 1W, 20Hz-20kHz): 0 dB, +/-1 dBCrosstalk (1 kHz, half power, 8 Ohms, Att. max. input 150 Ohm shunt):Maximum Input Level: +24 dBuInput Impedance: 20 kOhm balanced, 10 kOhm unbalancedConnectors:Analog Input: Euroblock x 2 (6P, balanced)Digital Input / Output: RJ45 x 2 (YDIF IN/OUT)Speaker Output: Barrier strip x 4 pairsNetwork: RJ45 x 1Remote, Fault Output: RJ45 x1AC IN: AC Inlet x 1Load Protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limitingAmplifier Protection:Thermal: Output mute (heatsink temp =90°C) (Restored automatically)Overcurrent: Output mute (Restored automatically)Low load impedance: Output mute (Restored automatically)Power Supply Protection:Thermal: Amplifier shuts down automatically (heatsink temp =100°C)Integrated power: Gain reduction (Restored automatically)Cooling Fan: 3-Speed fan x 2, front-to-back airflowPower Requirements: 100V, 120V, 230V-240V; 50Hz/60HzDimensions: 18.9" W x 3.5" H x 16.6" D (480 x 88 x 422 mm)Weight: 17.9 lbs (8.1 kg) Yamaha XMV4280 4-Channel 70V/4 Ohms/8 Ohms Power Amplifier with YDIF.
Price now:
From
$2,299.99
To
$2,874.99
This site contains affiliate links for which we may be compensated.
Full Compass Systems
4.98% (+ $126.00)
New
$2,655.99
Reverb (US) | $2,299.99Free Delivery | Store |
Reverb (US) | $2,299.99Free Delivery | Store |
Full Compass Systems | $2,655.99Free Delivery | Store |
Reverb (US) | $2,874.99Free Delivery | Store |
Product Description
XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The XMVquipped with the newly developed YDIF digital audio format for easy setup. Installed sound applications often demand both high and low impedance connectivity in the same venue, requiring separate, dedicated amplifiers or an external transformer. XMV power amplifiers, however, can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously, eliminating the need for additional equipment, as well as streamlining the installation process. XMV power amplifiers also enable both 70V and 100V operation for every pair of channels by simply selecting the preferred mode using the dip switches on the rear panel. High impedance operation often requires the use of two combined channels in bridge mode, but with XMV amplifiers, 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels. The newly developed Double Power Mode function effectively doubles the output power of selected channels in order to drive speakers with higher output power. This means that speakers with varying output capacities can be powered simultaneously by the same amplifier, adding flexibility to system design and configuration.*The number of channels that can be used will be reduced to half. XMV amplifiers come equipped with either the newly developed YDIF digital audio format, or Audinate’s digital audio network Dante. YDIF allows easy setup with the use of Ethernet cables while Dante models can be used for larger venues where long distant cabling is required.Features4x 280W at 8Ω/4Ω4x 250W at 100V/70V lines2x 560W at Double Power Mode (8Ω/4Ω)External control via EthernetProtection features for more reliable operationSpecificationsOutput Power (1 kHz, THD+N = 1%):4 Ohms: 280W x 48 Ohms: 280W x 44 Ohms/Double Power Mode: 560W x 28 Ohms/Double Power Mode: 560W x 2Output Power (High Impedance):100V line: 250W x 4 / 40 Ohm70V line: 250W x 4 / 20 OhmVoltage Gain:RL = 8 Ohms: 31.7 dBRL = 8 Ohms / Double Power Mode: 34.7 dB100V: 38.2 dB70V: 35.2 dBInput Sensitivity (RL = 8 Ohms): +4 dBuS/N Ratio (A-weighted): >/= 100 dBPower Consumption:1/8 power (4 Ohm pink noise): 250WIdle (4 Ohms): 37WStandby: 18.5WTHD+N (1 kHz, half power):< / = 0.2%Frequency Response (RL = 8 Ohms, 100V/70V, Po = 1W, 20Hz-20kHz): 0 dB, +/-1 dBCrosstalk (1 kHz, half power, 8 Ohms, Att. max. input 150 Ohm shunt):Maximum Input Level: +24 dBuInput Impedance: 20 kOhm balanced, 10 kOhm unbalancedConnectors:Analog Input: Euroblock x 2 (6P, balanced)Digital Input / Output: RJ45 x 2 (YDIF IN/OUT)Speaker Output: Barrier strip x 4 pairsNetwork: RJ45 x 1Remote, Fault Output: RJ45 x1AC IN: AC Inlet x 1Load Protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limitingAmplifier Protection:Thermal: Output mute (heatsink temp =90°C) (Restored automatically)Overcurrent: Output mute (Restored automatically)Low load impedance: Output mute (Restored automatically)Power Supply Protection:Thermal: Amplifier shuts down automatically (heatsink temp =100°C)Integrated power: Gain reduction (Restored automatically)Cooling Fan: 3-Speed fan x 2, front-to-back airflowPower Requirements: 100V, 120V, 230V-240V; 50Hz/60HzDimensions: 18.9" W x 3.5" H x 16.6" D (480 x 88 x 422 mm)Weight: 17.9 lbs (8.1 kg) Yamaha XMV4280 4-Channel 70V/4 Ohms/8 Ohms Power Amplifier with YDIF.
Product Specifications
General | |
|---|---|
Brand | Yamaha |
Size | 4 |
Color | pink |
Material | mode |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.