2200-006 Gma 200-Mt6 6 Gma 200 Controller
Powerful controller for control cabinet installationWherever gases are used or may be present in industrial and commercial applications, they must be monitored. A gas detection system consists of transmitters, which use sensors to detect gases, and a controller that is responsible for a wide variety of tasks. The GMA200-MT6 controller is ideally suited for use in complex gas detection systems with up to 16 transmitters (up to 6 of which are analog). Safety measures can be connected directly to the GMA200-MT6 using internal relays. The display will show the current measured values as well as any alarms or special states of the transmitters.Fixed transmitters monitor combustible or toxic gases and vapors present in the ambient air as well as the oxygen concentration. A controller displays the measured gas concentrations centrally and processes the incoming signals. The GMA200-MT6 is the right choice if:gases are monitored with up to 16 transmitters (up to 6 of which are analog)you need safety measures to be operated via the controllerthe measured values need to be displayed centrallyan acoustic and visual alarm is required on siteyou want the operating status and alarms to be indicated by status LEDsWide range of applications The GMA200-MT6 controller and the connected transmitters constitute a fixed gas detection system for measuring toxic and combustible gases as well as the oxygen concentration. Up to 16 digital transmitters can communicate with the controller using the RS-485 interface. Analog transmitters (up to 6) can be connected on 0.2-1 mA or 4-20 mA lines. The GMA200-MT6 is compatible with all GfG transmitters and suitable for any available type of gas. This offers a large number of possible combinations of gases, measuring ranges, measuring points and Ex-zones to be monitored simultaneously. The controller is designed for mounting on a DIN rail (TS35), for example in a control cabinet. The supply voltage is 24 V DC.Internal relays and extensionsFor the implementation of safety measures, 6 internal relays with one normally open contact each can be programmed individually. Two additional relays are available for fault notifications and maintenance. If required by the application, the number of programmable relays can be increased up to 70 (6 internal and 64 external relays). The relay modules are connected via the GMA bus interface. GfG's GMA200-RT and GMA200-RTD relay modules allow safety measures to be implemented in a decentralized manner, reducing the amount of cabling required.Clear indicators for assessing the hazard situationThe GMA200-MT6 has a color-backlit 2.2-inch display. It shows the current measured values of the connected transmitters at any time. In the event of an alarm, the background color changes from green to red. At the same time, LEDs indicate the alarm level and the relay activation status. A local alarm with a loud, integrated buzzer (70 dB(A)) is also triggered. There are two inputs available for push-buttons used for external alarm acknowledgement.Operation, visualization and data storageOn site, the controller and the alarm acknowledgement are operated intuitively using five push-buttons. The device is configured using the GMAConfig software and a PC connected to the mini-USB interface. With the optional GMA200-VS software, all measured values and statuses of the connected transmitters can also be displayed non-centrally on a PC or other screen. Equipped with a microSD card, the controller permanently stores measured values, average values, alarm events and faults at individually configurable intervals for evaluation.General information:Suitable for every GfG transmitterMonitors 1 to 16 measuring pointsFeatures:8 integrated relays for safety measures, fault notifications and maintenance (6 of which can be programmed freely)0.2-1 mA, 4-20 mA or RS-485 (Modbus)Color-backlit 2.2"" display15 colored status LEDsAudible alarmHousing for rail mounting (TS35)Approvals / Certifications:ATEX certification: II (2) GSIL 2/3Number of measuring points, data logging: 6For more information, please see Data Sheet and Manual
Price now:
From
$2,192.00
To
$2,419.00
Price History:
Details:2200-006 Gma 200-Mt6 6 Gma 200 Controller
Powerful controller for control cabinet installationWherever gases are used or may be present in industrial and commercial applications, they must be monitored. A gas detection system consists of transmitters, which use sensors to detect gases, and a controller that is responsible for a wide variety of tasks. The GMA200-MT6 controller is ideally suited for use in complex gas detection systems with up to 16 transmitters (up to 6 of which are analog). Safety measures can be connected directly to the GMA200-MT6 using internal relays. The display will show the current measured values as well as any alarms or special states of the transmitters.Fixed transmitters monitor combustible or toxic gases and vapors present in the ambient air as well as the oxygen concentration. A controller displays the measured gas concentrations centrally and processes the incoming signals. The GMA200-MT6 is the right choice if:gases are monitored with up to 16 transmitters (up to 6 of which are analog)you need safety measures to be operated via the controllerthe measured values need to be displayed centrallyan acoustic and visual alarm is required on siteyou want the operating status and alarms to be indicated by status LEDsWide range of applications The GMA200-MT6 controller and the connected transmitters constitute a fixed gas detection system for measuring toxic and combustible gases as well as the oxygen concentration. Up to 16 digital transmitters can communicate with the controller using the RS-485 interface. Analog transmitters (up to 6) can be connected on 0.2-1 mA or 4-20 mA lines. The GMA200-MT6 is compatible with all GfG transmitters and suitable for any available type of gas. This offers a large number of possible combinations of gases, measuring ranges, measuring points and Ex-zones to be monitored simultaneously. The controller is designed for mounting on a DIN rail (TS35), for example in a control cabinet. The supply voltage is 24 V DC.Internal relays and extensionsFor the implementation of safety measures, 6 internal relays with one normally open contact each can be programmed individually. Two additional relays are available for fault notifications and maintenance. If required by the application, the number of programmable relays can be increased up to 70 (6 internal and 64 external relays). The relay modules are connected via the GMA bus interface. GfG's GMA200-RT and GMA200-RTD relay modules allow safety measures to be implemented in a decentralized manner, reducing the amount of cabling required.Clear indicators for assessing the hazard situationThe GMA200-MT6 has a color-backlit 2.2-inch display. It shows the current measured values of the connected transmitters at any time. In the event of an alarm, the background color changes from green to red. At the same time, LEDs indicate the alarm level and the relay activation status. A local alarm with a loud, integrated buzzer (70 dB(A)) is also triggered. There are two inputs available for push-buttons used for external alarm acknowledgement.Operation, visualization and data storageOn site, the controller and the alarm acknowledgement are operated intuitively using five push-buttons. The device is configured using the GMAConfig software and a PC connected to the mini-USB interface. With the optional GMA200-VS software, all measured values and statuses of the connected transmitters can also be displayed non-centrally on a PC or other screen. Equipped with a microSD card, the controller permanently stores measured values, average values, alarm events and faults at individually configurable intervals for evaluation.General information:Suitable for every GfG transmitterMonitors 1 to 16 measuring pointsFeatures:8 integrated relays for safety measures, fault notifications and maintenance (6 of which can be programmed freely)0.2-1 mA, 4-20 mA or RS-485 (Modbus)Color-backlit 2.2"" display15 colored status LEDsAudible alarmHousing for rail mounting (TS35)Approvals / Certifications:ATEX certification: II (2) GSIL 2/3Number of measuring points, data logging: 6For more information, please see Data Sheet and Manual
Price now:
From
$2,192.00
To
$2,419.00
This site contains affiliate links for which we may be compensated.
Selectum LLC
0.00% (~ $$v)
New
$2,192.00
$2,625.00
Mega Depot, LLC
0.00% (~ $$v)
New
$2,419.00
$2,625.00
Selectum LLC | $2,192.00Free Delivery | Store |
Mega Depot, LLC | $2,419.00Free Delivery | Store |
Product Description
Powerful controller for control cabinet installationWherever gases are used or may be present in industrial and commercial applications, they must be monitored. A gas detection system consists of transmitters, which use sensors to detect gases, and a controller that is responsible for a wide variety of tasks. The GMA200-MT6 controller is ideally suited for use in complex gas detection systems with up to 16 transmitters (up to 6 of which are analog). Safety measures can be connected directly to the GMA200-MT6 using internal relays. The display will show the current measured values as well as any alarms or special states of the transmitters.Fixed transmitters monitor combustible or toxic gases and vapors present in the ambient air as well as the oxygen concentration. A controller displays the measured gas concentrations centrally and processes the incoming signals. The GMA200-MT6 is the right choice if:gases are monitored with up to 16 transmitters (up to 6 of which are analog)you need safety measures to be operated via the controllerthe measured values need to be displayed centrallyan acoustic and visual alarm is required on siteyou want the operating status and alarms to be indicated by status LEDsWide range of applications The GMA200-MT6 controller and the connected transmitters constitute a fixed gas detection system for measuring toxic and combustible gases as well as the oxygen concentration. Up to 16 digital transmitters can communicate with the controller using the RS-485 interface. Analog transmitters (up to 6) can be connected on 0.2-1 mA or 4-20 mA lines. The GMA200-MT6 is compatible with all GfG transmitters and suitable for any available type of gas. This offers a large number of possible combinations of gases, measuring ranges, measuring points and Ex-zones to be monitored simultaneously. The controller is designed for mounting on a DIN rail (TS35), for example in a control cabinet. The supply voltage is 24 V DC.Internal relays and extensionsFor the implementation of safety measures, 6 internal relays with one normally open contact each can be programmed individually. Two additional relays are available for fault notifications and maintenance. If required by the application, the number of programmable relays can be increased up to 70 (6 internal and 64 external relays). The relay modules are connected via the GMA bus interface. GfG's GMA200-RT and GMA200-RTD relay modules allow safety measures to be implemented in a decentralized manner, reducing the amount of cabling required.Clear indicators for assessing the hazard situationThe GMA200-MT6 has a color-backlit 2.2-inch display. It shows the current measured values of the connected transmitters at any time. In the event of an alarm, the background color changes from green to red. At the same time, LEDs indicate the alarm level and the relay activation status. A local alarm with a loud, integrated buzzer (70 dB(A)) is also triggered. There are two inputs available for push-buttons used for external alarm acknowledgement.Operation, visualization and data storageOn site, the controller and the alarm acknowledgement are operated intuitively using five push-buttons. The device is configured using the GMAConfig software and a PC connected to the mini-USB interface. With the optional GMA200-VS software, all measured values and statuses of the connected transmitters can also be displayed non-centrally on a PC or other screen. Equipped with a microSD card, the controller permanently stores measured values, average values, alarm events and faults at individually configurable intervals for evaluation.General information:Suitable for every GfG transmitterMonitors 1 to 16 measuring pointsFeatures:8 integrated relays for safety measures, fault notifications and maintenance (6 of which can be programmed freely)0.2-1 mA, 4-20 mA or RS-485 (Modbus)Color-backlit 2.2"" display15 colored status LEDsAudible alarmHousing for rail mounting (TS35)Approvals / Certifications:ATEX certification: II (2) GSIL 2/3Number of measuring points, data logging: 6For more information, please see Data Sheet and Manual
Product Specifications
General | |
|---|---|
Color | green/red |
Size | 6 |
Brand | 2200-006 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.