Peavey Pv03004350
The IPR2™ 5000 from Peavey® boasts 2,525 watts per channel at 2 Ω and weights in at under 7 kg. It features 2-channel independent 4th-order Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, DDT speaker protection, and the revolutionary IPR-2 class D topology.Features2900 W RMS x 1 at 2 Ω1780 W RMS x 1 at 4 Ω975 W RMS x 1 at 8 Ω2525 W RMS x 2 at 2 Ω1510 W RMS x 2 at 4 Ω890 W RMS x 2 at 8 Ω2-channel independent, 4-order Linkwitz-Riley crossoversDDT protectionRevolutionary IPR class D topologyDetented input controlsCombination XLR-¼" inputs4 pole twist-lock output connectorsUltra-light weightIndividual signal pass ¼" jacks on each channelLED illuminatedStandby, LED power present indicationSpecificationsRated Watts:2-ch x 2 Ω 3230 Watts 20ms repetitive burst / 2530 Watts 1% THD both channels driven @ 1 kHz.2-ch x 4 Ω 1985 Watts 20ms repetitive burst / 1700 Watts 1% THD / 1470 Watts 0.15% THD, both channels driven @ 1 kHz.2-ch x 8 Ω 1175 Watts 20ms repetitive burst / 1025 Watts 1% THD / 880 Watts 0.15% THD, both channels driven @ 1 kHz.Minimum Load Impedance: 2 ΩMaximum RMS Voltage Swing: 105 voltsFrequency Response:20 Hz - 22 kHz; +/- 0.5dB at 1 Watt20 Hz - 20 kHz 2-ch x 2 Ω:- 75 dB @ 1 kHz.Voltage Gain: x 40 (+32 dB)Crossover: 100Hz switchable 2nd-order high pass and 3rd low pass per channel.Crosstalk: >-60 dB @ 1 kHz @ 700 Watts power @ 8 ΩHum and Noise: >-105 dB, “A” weighted referenced to rated power @ 4 ΩSlew Rate: >12V/µsDamping Factor (8 Ω): >210:1 @ 20 Hz - 1 kHz @ 8ΩInput Sensitivity: 1.95 volts +/- 3% for 1 kHz 4 Ω rated power, 1.83 volts +/- 3% for 1 kHz 2 Ω rated powerInput Impedance: 20 kΩ, balanced and 10 kΩ unbalanced.Current Draw @ 1/8 in VA (Watts): 1435 (890) @ 2 Ω, 920 (525) @ 4 Ω, 625 (335) @ 8 ΩCurrent Draw @ 1/3 in VA (Watts): 3050 (2155) @ 2 Ω, 1880 (1200) @ 4 Ω, 1200 (715) @ 8 ΩIdle Consumption: 195 VA, 90 WattsCooling: 3 temperature dependent variable speed fans.Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPFIndicator LED: Five LED indicators per channel: Active, Signal, DDT, Temperature and DCProtection: Thermal, DC, subsonic, incorrect loads, under and over voltageConnectors:Inputs: Dual combination ¼"-XLROutputs: Dual ¼" thru, one 2-pin and one 4-pin twist-lock connectorConstruction: 0.062” thick aluminumDimensions: 3.5" x 19" x 17" behind front panel + 0.6" for handleNet Weight: 6.2 kg (13.6 lbs.*)Gross Weight: 7.9 kg (17.4 lbs.)Weight, Unpacked: 13.67 lbs. (6.2 kg)Weight, Packed: 17.42 lbs. (7.9 kg)Width, Packed: 21" (53.34 cm)Height, Packed: 21.2" (53.848 cm)Depth, Packed: 6" (15.24 cm) Peavey IPR2 5000 2-Channel Power Amplifier, 1510W per Channel.
Price now:
From
$929.99
To
$1,199.99
Price History:
Details:Peavey Pv03004350
The IPR2™ 5000 from Peavey® boasts 2,525 watts per channel at 2 Ω and weights in at under 7 kg. It features 2-channel independent 4th-order Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, DDT speaker protection, and the revolutionary IPR-2 class D topology.Features2900 W RMS x 1 at 2 Ω1780 W RMS x 1 at 4 Ω975 W RMS x 1 at 8 Ω2525 W RMS x 2 at 2 Ω1510 W RMS x 2 at 4 Ω890 W RMS x 2 at 8 Ω2-channel independent, 4-order Linkwitz-Riley crossoversDDT protectionRevolutionary IPR class D topologyDetented input controlsCombination XLR-¼" inputs4 pole twist-lock output connectorsUltra-light weightIndividual signal pass ¼" jacks on each channelLED illuminatedStandby, LED power present indicationSpecificationsRated Watts:2-ch x 2 Ω 3230 Watts 20ms repetitive burst / 2530 Watts 1% THD both channels driven @ 1 kHz.2-ch x 4 Ω 1985 Watts 20ms repetitive burst / 1700 Watts 1% THD / 1470 Watts 0.15% THD, both channels driven @ 1 kHz.2-ch x 8 Ω 1175 Watts 20ms repetitive burst / 1025 Watts 1% THD / 880 Watts 0.15% THD, both channels driven @ 1 kHz.Minimum Load Impedance: 2 ΩMaximum RMS Voltage Swing: 105 voltsFrequency Response:20 Hz - 22 kHz; +/- 0.5dB at 1 Watt20 Hz - 20 kHz 2-ch x 2 Ω:- 75 dB @ 1 kHz.Voltage Gain: x 40 (+32 dB)Crossover: 100Hz switchable 2nd-order high pass and 3rd low pass per channel.Crosstalk: >-60 dB @ 1 kHz @ 700 Watts power @ 8 ΩHum and Noise: >-105 dB, “A” weighted referenced to rated power @ 4 ΩSlew Rate: >12V/µsDamping Factor (8 Ω): >210:1 @ 20 Hz - 1 kHz @ 8ΩInput Sensitivity: 1.95 volts +/- 3% for 1 kHz 4 Ω rated power, 1.83 volts +/- 3% for 1 kHz 2 Ω rated powerInput Impedance: 20 kΩ, balanced and 10 kΩ unbalanced.Current Draw @ 1/8 in VA (Watts): 1435 (890) @ 2 Ω, 920 (525) @ 4 Ω, 625 (335) @ 8 ΩCurrent Draw @ 1/3 in VA (Watts): 3050 (2155) @ 2 Ω, 1880 (1200) @ 4 Ω, 1200 (715) @ 8 ΩIdle Consumption: 195 VA, 90 WattsCooling: 3 temperature dependent variable speed fans.Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPFIndicator LED: Five LED indicators per channel: Active, Signal, DDT, Temperature and DCProtection: Thermal, DC, subsonic, incorrect loads, under and over voltageConnectors:Inputs: Dual combination ¼"-XLROutputs: Dual ¼" thru, one 2-pin and one 4-pin twist-lock connectorConstruction: 0.062” thick aluminumDimensions: 3.5" x 19" x 17" behind front panel + 0.6" for handleNet Weight: 6.2 kg (13.6 lbs.*)Gross Weight: 7.9 kg (17.4 lbs.)Weight, Unpacked: 13.67 lbs. (6.2 kg)Weight, Packed: 17.42 lbs. (7.9 kg)Width, Packed: 21" (53.34 cm)Height, Packed: 21.2" (53.848 cm)Depth, Packed: 6" (15.24 cm) Peavey IPR2 5000 2-Channel Power Amplifier, 1510W per Channel.
Price now:
From
$929.99
To
$1,199.99
This site contains affiliate links for which we may be compensated.
Reverb (US)
2.11% ( -$20.00)
Used
$929.99
$949.99
Full Compass Systems
20.00% (+ $200.00)
New
$1,199.99
Reverb (US)
20.00% (+ $200.00)
New
$1,199.99
Reverb (US) | $929.99Free Delivery | Store |
Reverb (US) | $971.99$14.99 Delivery | Store |
Reverb (US) | $1,103.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Full Compass Systems | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Reverb (US) | $1,199.99Free Delivery | Store |
Product Description
The IPR2™ 5000 from Peavey® boasts 2,525 watts per channel at 2 Ω and weights in at under 7 kg. It features 2-channel independent 4th-order Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, DDT speaker protection, and the revolutionary IPR-2 class D topology.Features2900 W RMS x 1 at 2 Ω1780 W RMS x 1 at 4 Ω975 W RMS x 1 at 8 Ω2525 W RMS x 2 at 2 Ω1510 W RMS x 2 at 4 Ω890 W RMS x 2 at 8 Ω2-channel independent, 4-order Linkwitz-Riley crossoversDDT protectionRevolutionary IPR class D topologyDetented input controlsCombination XLR-¼" inputs4 pole twist-lock output connectorsUltra-light weightIndividual signal pass ¼" jacks on each channelLED illuminatedStandby, LED power present indicationSpecificationsRated Watts:2-ch x 2 Ω 3230 Watts 20ms repetitive burst / 2530 Watts 1% THD both channels driven @ 1 kHz.2-ch x 4 Ω 1985 Watts 20ms repetitive burst / 1700 Watts 1% THD / 1470 Watts 0.15% THD, both channels driven @ 1 kHz.2-ch x 8 Ω 1175 Watts 20ms repetitive burst / 1025 Watts 1% THD / 880 Watts 0.15% THD, both channels driven @ 1 kHz.Minimum Load Impedance: 2 ΩMaximum RMS Voltage Swing: 105 voltsFrequency Response:20 Hz - 22 kHz; +/- 0.5dB at 1 Watt20 Hz - 20 kHz 2-ch x 2 Ω:- 75 dB @ 1 kHz.Voltage Gain: x 40 (+32 dB)Crossover: 100Hz switchable 2nd-order high pass and 3rd low pass per channel.Crosstalk: >-60 dB @ 1 kHz @ 700 Watts power @ 8 ΩHum and Noise: >-105 dB, “A” weighted referenced to rated power @ 4 ΩSlew Rate: >12V/µsDamping Factor (8 Ω): >210:1 @ 20 Hz - 1 kHz @ 8ΩInput Sensitivity: 1.95 volts +/- 3% for 1 kHz 4 Ω rated power, 1.83 volts +/- 3% for 1 kHz 2 Ω rated powerInput Impedance: 20 kΩ, balanced and 10 kΩ unbalanced.Current Draw @ 1/8 in VA (Watts): 1435 (890) @ 2 Ω, 920 (525) @ 4 Ω, 625 (335) @ 8 ΩCurrent Draw @ 1/3 in VA (Watts): 3050 (2155) @ 2 Ω, 1880 (1200) @ 4 Ω, 1200 (715) @ 8 ΩIdle Consumption: 195 VA, 90 WattsCooling: 3 temperature dependent variable speed fans.Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPFIndicator LED: Five LED indicators per channel: Active, Signal, DDT, Temperature and DCProtection: Thermal, DC, subsonic, incorrect loads, under and over voltageConnectors:Inputs: Dual combination ¼"-XLROutputs: Dual ¼" thru, one 2-pin and one 4-pin twist-lock connectorConstruction: 0.062” thick aluminumDimensions: 3.5" x 19" x 17" behind front panel + 0.6" for handleNet Weight: 6.2 kg (13.6 lbs.*)Gross Weight: 7.9 kg (17.4 lbs.)Weight, Unpacked: 13.67 lbs. (6.2 kg)Weight, Packed: 17.42 lbs. (7.9 kg)Width, Packed: 21" (53.34 cm)Height, Packed: 21.2" (53.848 cm)Depth, Packed: 6" (15.24 cm) Peavey IPR2 5000 2-Channel Power Amplifier, 1510W per Channel.
Product Specifications
General | |
|---|---|
Color | 678 |
Brand | Peavey |
Size | 2 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.